Skip navigation
Currently Being Moderated

Drawing with the Pen tools

May 4, 2012 12:54 PM

 
Replies
  • Currently Being Moderated
    May 4, 2012 12:55 PM   in reply to Community Help

    drawing with pen tool on photograph; close path when finished; does not print. how to print????

     
    |
    Mark as:
  • Currently Being Moderated
    May 4, 2012 1:23 PM   in reply to syates13

    Do you want to make a selection of the path?

     

    Open Path tab in Window and then choose icon on bottom of window that state "make selection from path"

     
    |
    Mark as:
  • Currently Being Moderated
    May 4, 2012 7:52 PM   in reply to Curt Y

    Thanks Curt Y for your response, the message indicated I did not "send" the question.

     

    I attempted to make a selection after closing the path, but nothing printed; only drawing on photograph existed on the MacBook screen in the digital photographic image only. (this in the pen tool, which looks like it "draws" on blank sheets, which I have done, but not "into" photographic images)

     

    I have also gone to the line tool: drawn, made thickness of line as well as color decisions in upper bar; then "option/entered" the keys to set drawing into the photographic image. While the line tool is more limited, it did print the lines I embedded in the photography.

     

    So the line tool works. The pen tool does not, which I prefer to draw with (and using its various geometric, linear and curve line components).

     

    In fact I would also like to use the polygonal tool in its linear mode as well: to create drawings with it, and place (embed) them into the photographic imagery.

     

    Perhaps there are other keys to "set" drawings into the photographic imagery, for the pen and polygonal tools? Or not possible? Thanks again.

     

    -say

     

     

    Date: Fri, 4 May 2012 14:23:35 -0600

    From: forums@adobe.com

    To: syates13@hotmail.com

    Subject: Re:  Drawing with the Pen tools Drawing with the Pen tools

     

     

     

     

     

     

          

               

               

               

        Re:  Drawing with the Pen tools

     

     

        created by Curt Y in Photoshop General Discussion - View the full discussion

     

     

     

    Do you want to make a selection of the path? Open Path tab in Window and then choose icon on bottom of window that state "make selection from path"

     

     

         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re:  Drawing with the Pen tools

         To unsubscribe from this thread, please visit the message page at Re:  Drawing with the Pen tools. In the Actions box on the right, click the Stop Email Notifications link.

          

         Start a new discussion in Photoshop General Discussion by email or at Adobe Forums

      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

     
    |
    Mark as:
  • Currently Being Moderated
    May 4, 2012 8:00 PM   in reply to syates13

    Perhaps you are talking about stroking the line? 

     

    Set the color and size with brush, then in Path window click on Stroke Path with Brush.

     
    |
    Mark as:
  • Currently Being Moderated
    May 5, 2012 11:16 AM   in reply to Curt Y

    creating multiple lines, curves and variations with many geometric qualities best found in the pen tool is what would be preferred. unfortunately the pen tool is not pixel based. so the brush, pencil and mixer brush tools (found under brush tool) provide free hand alternatives but not geometric linear alternatives found under the pen tool. this is the unfortunate shortfall of the pen tool: cannot use it within or over photographic imagery. but wonder if there is a way to create a blank page layer for drawing with the pen tool, then to combine overlaying the photo?

     

    Date: Fri, 4 May 2012 21:00:54 -0600

    From: forums@adobe.com

    To: syates13@hotmail.com

    Subject: Re:  Drawing with the Pen tools Drawing with the Pen tools

     

     

     

     

     

     

          

               

               

               

        Re:  Drawing with the Pen tools

     

     

        created by Curt Y in Photoshop General Discussion - View the full discussion

     

     

     

    Perhaps you are talking about stroking the line?   Set the color and size with brush, then in Path window click on Stroke Path with Brush.

     

     

         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re:  Drawing with the Pen tools

         To unsubscribe from this thread, please visit the message page at Re:  Drawing with the Pen tools. In the Actions box on the right, click the Stop Email Notifications link.

          

         Start a new discussion in Photoshop General Discussion by email or at Adobe Forums

      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

     
    |
    Mark as:
  • Currently Being Moderated
    May 5, 2012 1:08 PM   in reply to Curt Y

    Curt, believe I found the answer:

     

     

    Create a new blank page, the size of the photograph to be worked on. The blank page is what the pen tool responds to only.

     

    Add the photographic image to the new blank page (same size).

     

    Now you can use the pen tool over the photographic image. When finished drawing, flatten the image with drawing, and print. 

     

     

    Date: Fri, 4 May 2012 21:00:54 -0600

    From: forums@adobe.com

    To: syates13@hotmail.com

    Subject: Re:  Drawing with the Pen tools Drawing with the Pen tools

     

     

     

     

     

     

          

               

               

               

        Re:  Drawing with the Pen tools

     

     

        created by Curt Y in Photoshop General Discussion - View the full discussion

     

     

     

    Perhaps you are talking about stroking the line?   Set the color and size with brush, then in Path window click on Stroke Path with Brush.

     

     

         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re:  Drawing with the Pen tools

         To unsubscribe from this thread, please visit the message page at Re:  Drawing with the Pen tools. In the Actions box on the right, click the Stop Email Notifications link.

          

         Start a new discussion in Photoshop General Discussion by email or at Adobe Forums

      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

     
    |
    Mark as:
  • Currently Being Moderated
    May 5, 2012 3:28 PM   in reply to Curt Y

    Correction: same issue -- pen tool drawing shows up only on the digital image on the screen. Not when printed. Well sounded like a good theory.

     

    Problem remains: how to get pen tool drawing, made on photographs, to print.

     

     

    From: syates13@hotmail.com

    To: jive-35000100-y0bm-2-2lw57@mail.forums.adobe.com

    Subject: Re:  Drawing with the Pen tools Drawing with the Pen tools o photographi

    Date: Sat, 5 May 2012 20:08:05 +0000

     

     

     

     

     

    Curt, believe I found the answer:

     

     

    Create a new blank page, the size of the photograph to be worked on. The blank page is what the pen tool responds to only.

     

    Add the photographic image to the new blank page (same size).

     

    Now you can use the pen tool over the photographic image. When finished drawing, flatten the image with drawing, and print. 

     

     

    Date: Fri, 4 May 2012 21:00:54 -0600

    From: forums@adobe.com

    To: syates13@hotmail.com

    Subject: Re:  Drawing with the Pen tools Drawing with the Pen tools

     

     

     

     

     

     

          

               

               

               

        Re:  Drawing with the Pen tools

     

     

        created by Curt Y in Photoshop General Discussion - View the full discussion

     

     

     

    Perhaps you are talking about stroking the line? 

    Set the color and size with brush, then in Path window click on Stroke Path with Brush.

     

     

     

         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re:  Drawing with the Pen tools

         To unsubscribe from this thread, please visit the message page at Re:  Drawing with the Pen tools. In the Actions box on the right, click the Stop Email Notifications link.

          

         Start a new discussion in Photoshop General Discussion by email or at Adobe Forums

      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

     
    |
    Mark as:
  • Currently Being Moderated
    May 5, 2012 5:43 PM   in reply to syates13

    Think the problem line is the properties of a vector.  Vector paths in Photoshop are invisible, what you are seeing is a pixel layer filled with a solid color and delimited by a vector path.  Beleive you need to rasterize it to get what you want.

     

    My knowledge base is limited here so you might want to google this concept.

     
    |
    Mark as:
  • Currently Being Moderated
    May 5, 2012 5:45 PM   in reply to Curt Y

    Thanks, good idea. Will rasterize to see what it will do. Yes it is a vector.

     

    Date: Sat, 5 May 2012 18:43:35 -0600

    From: forums@adobe.com

    To: syates13@hotmail.com

    Subject: Re:  Drawing with the Pen tools Drawing with the Pen tools

     

     

     

     

     

     

          

               

               

               

        Re:  Drawing with the Pen tools

     

     

        created by Curt Y in Photoshop General Discussion - View the full discussion

     

     

     

    Think the problem line is the properties of a vector.  Vector paths in Photoshop are invisible, what you are seeing is a pixel layer filled with a solid color and delimited by a vector path.  Beleive you need to rasterize it to get what you want.

    My knowledge base is limited here so you might want to google this concept.

     

     

     

         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re:  Drawing with the Pen tools

         To unsubscribe from this thread, please visit the message page at Re:  Drawing with the Pen tools. In the Actions box on the right, click the Stop Email Notifications link.

          

         Start a new discussion in Photoshop General Discussion by email or at Adobe Forums

      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

     
    |
    Mark as:
  • Currently Being Moderated
    May 5, 2012 7:05 PM   in reply to syates13

    syates13

     

    Should have mentioned this earilier, but delete your e-mail address from your replies.

     

    Also do not include the paragraphs   Replies to this message -  - - - - - and Start a new discussion - - - - - as it just makes the thread longer.

     
    |
    Mark as:
  • Currently Being Moderated
    May 5, 2012 7:32 PM   in reply to syates13

    As Curt Y mentions, a Path (whether an Open Path, a Closed Path or a Shape - very similar to a Closed Path) is but a mathematical depiction of that Path. Until you Stroke, and/or Fill the Path, there is not yet anything to Print.

     

    Open your photographic Image. Create a New Layer. Create your Path with the Pen Tool. When compete, go to the Paths Palette, and choose Stroke Path, choosing the Tool (Brush, Pencil, etc.) of choice, and then you will see the results on that New Layer. The same for Fill Path.

     

    Now, when you Print, you WILL see the results.

     

    Good luck,

     

    Hunt

     
    |
    Mark as:
  • Currently Being Moderated
    May 5, 2012 7:37 PM   in reply to Bill Hunt

    Yea, that is what I told him in post #4 but you explained it in much more detail.

     
    |
    Mark as:
  • Currently Being Moderated
    May 5, 2012 7:57 PM   in reply to Curt Y

    Curt,

     

    That is what I was thinking too, but it did not seem to have been absorbed, as I had expected it to be.

     

    Hope that it is now clear.

     

    Hunt

     
    |
    Mark as:
  • Trevor Dennis
    5,921 posts
    May 24, 2010
    Currently Being Moderated
    May 5, 2012 11:51 PM   in reply to Bill Hunt

    When this thread first went up, I was not getting the OP's problem, but it's obvious when Bill and Curt explain it so well.  Nice one.

     
    |
    Mark as:
  • Currently Being Moderated
    May 6, 2012 3:00 PM   in reply to Bill Hunt

    Thanks all, greatly appreciated. Understand the virtual ("mathematical depiction of that path") drawing versus final stroked or filled marked paths.

     

    After reviewing your details especially with Bill's added suggestions, i.e., making the new layer and add pen drawing in the layer after the photographic image was pulled up, things unfolded nicely.

     

    Working through APS idiosyncracies (choices found in Paths Palette in APS 5CS Extended need added under Windows menu) managed to begin the process of drawing additions with the Pen Tool, that are not possible with Line or Brush tools. What I attempted was basically the reverse: make the blank page than add the photographic image and try to draw on it with the Pen Tool. 

     

    One last detail: under the Line Tool one can vary the width of lines -- but only straight lines. Doesn't appear possible with the Pen Tool, with its curved lines unfortunately. The width of the lines in the Pen Tool seem to have a set default in width, unvariable?

     

    Many thanks again. These final photograhpic works are large scale prints with the Epson 9900 so the upfront proofings are critical.

     

    =say 

     
    |
    Mark as:
  • Currently Being Moderated
    May 6, 2012 7:13 PM   in reply to syates13

    When you stroke the path the line width and character are set by the brush settings.

     
    |
    Mark as:
  • Currently Being Moderated
    May 6, 2012 7:56 PM   in reply to Curt Y

    Alright, so I will check existing brush settings for line width and character, which are in a sense presets. Great. Appreciate your expertise. Back to printing tomorrow with all this in mind, allowing even further potentials.

     
    |
    Mark as:
  • Currently Being Moderated
    May 6, 2012 9:36 PM   in reply to syates13

    syates13 wrote:

     

    ... under the Line Tool one can vary the width of lines -- but only straight lines. Doesn't appear possible with the Pen Tool, with its curved lines unfortunately. The width of the lines in the Pen Tool seem to have a set default in width, unvariable?

    Think of the line tool as a thin rectangle drawn with the pen tool. And you can think the same about all shape objects that create shape layers. All vector element in Photoshop a the same thing - vector paths that can be used to create pixels.

     
    |
    Mark as:

More Like This

  • Retrieving data ...

Bookmarked By (0)

Answers + Points = Status

  • 10 points awarded for Correct Answers
  • 5 points awarded for Helpful Answers
  • 10,000+ points
  • 1,001-10,000 points
  • 501-1,000 points
  • 5-500 points