I 'm would like to know if anyone has used a PNY VCQ6000-PB Quadro 6000 6GB 384-bit GDDR5 PCI Express 2.0 x16 Workstation Video Card with a tesls c7075
or is somthing better to run Premiere CS6 Suite. (for video editing or is it over kill)
I heard about one organization that uses a setup like this:
Dual Xeon i5-2690 (€ 4,000)
96 GB memory (€ 2,200)
Tesla C2075 (€ 2,200)
Quadro 6000 (€ 3,600)
Petarack (€ 500,000)
and the other minor periphernalia (€ 8,000) .
Seriously, how many do you expect to spend around € 5,800 on a video solution with only 448 CUDA cores for MPE assitance, when a GTX 680 goes for € 450?
My personal preference is currently the 4 GB GTX 680 version, but I'm hoping that nVidia will come out with a version, that I have called the 685, with a 384 bit memory bus instead of the current 256 bit bus. That will make a huge difference in performance. The 690 does nothing for PR, since the second GPU is not used at all, it is completely idle.
The K20 is nice according to the specs, but I would not be surprised to see prices like K10 for around € 2600 and K20 for around € 4000. That brings the cost together with a Quadro 6000 into astronomous ranges. BFTB-wise it is still a lousy investment.
|317-8697||1||Dual Six CoreXEON E5-2630,2.2GHz,15M,Dell Precision T7600|
|317-9079||1||32GB DDR3 RDIMM 1600,ECC,4x8GB,PWSTX600|
|331-7453||1||No Keyboard Selected,Dell Precision Desktops|
|320-3299||1||6GB nVIDIA Quadro 6000 with SLI,Dual Monitor,1DP and 1DVI,Dell Precision Tx600|
|342-4014||1||C2 SATA/SSD 2.5 Inch,1-4 Hard Drives,Dell Precision T7600|
|318-1335||1||19 in 1,Media Card Reader,Dell Precision T5600|
|421-5607||1||Windows 7 Professional,No Media, 64-bit,Fixed Precision, English|
|330-6228||1||Windows 7 Label, OptiPlex, Fixed Precision, Vostro Desktop|
|421-5335||1||Dell Client System Update (Updates latest Dell Recommended BIOS, Drivers, Firmware and Apps),Precision Desktop|
|310-1247||1||No Mouse for Workstation Model|
|331-3037||1||Rack Mountable Platform without Rails, Dell Precision R5500|
|342-5065||1||PERC H310 SATA/SAS Controller for Dell Precision, T7600|
|318-1326||1||8X DVD+/-RW,Data Only,Dell Precision T3600,T5600 and T7600|
|318-2231||1||Thank you for Choosing Dell|
|313-2663||1||No Speaker option|
|330-1085||1||No Remote Access Host Card forFX100 Remote Access Device,Dell Precision Desktop|
|318-1333||1||Dell Precision,T7600,1300W 85% Efficiency|
|342-2635||1||Enable Low Power Mode for EUP Compliance,Dell Precision Desktop|
|331-4129||1||Regulatory Label,Dell Precision T7600|
|421-6519||1||Dell Data Protection Access,Precision T3600, T5600 and T7600|
|330-3157||1||Power Cord,125V,2M,C13,Dell Precision|
|331-2477||1||Documentation,English and French,Dell Precision|
|330-3201||1||Energy Star Not Selected,Dell Precision Desktop|
|331-4131||1||No Out-of-Band Systems MGMT,PWS T7600|
|330-4024||1||No Resource CD for Dell Precision Desktop|
|331-4117||1||RAID 0, Dell Precision T3600, T5600 and T7600|
|330-5527||1||No Quick Reference Guide|
|331-4135||1||Shipping Material for System,Dell Precision T7600|
|421-3872||1||No Productivity Software,Dell OptiPlex,Precision and Latitude|
|938-4528||1||Dell Limited Hardware Warranty Plus Service Extended Year(s)|
|934-8127||1||Dell Limited Hardware Warranty Plus Service Initial Year|
|994-3502||1||ProSupport: Next Business Day Limited Onsite Service After Remote Diagnosis 2 Year Extended|
|994-9770||1||ProSupport: Next Business Day Limited Onsite Service After Remote Diagnosis Initial Year|
|989-3449||1||Thank you choosing Dell ProSupport. For tech support, visit http://support.dell.com/ProSupport or call 1-866-516-3115|
|994-3582||1||ProSupport : 7x24 Technical Support , 2 Year Extended|
|994-9910||1||ProSupport : 7x24 Technical Support , Initial|
|320-3685||1||NVIDIA Tesla C2075 Computing Processor,Dell Precision Tx600|
|331-4130||1||Resource DVD contains Diagnostics and Drivers,Dell Precision T7600|
|421-5682||1||Media Kit,Win 7 Professional 64bit,MUI,Dell OptiPlex, Precision and Latitude|
|430-4383||1||1394A Controller Card,Dell Precision T3600, T5600 and T7600|
|365-0530||1||CFI,Integration Fee,Order Ready,Pronc|
|*||-DISCOUNT: SPECIAL OF|
couldn't quite figure out from your configuration exactly what kind of workload you are trying to address? If it is just editing, your current configuration should be more balanced between cpu, video, & disk. imo there are too few disks, spent waayyy too much on video and the $$ would be better spent on disk then cpu.
This is a system that may equal a single i7-3930K in performance for around four times the price, at least if you are lucky. Quite possibly it will not quite reach the performance level of a € 3000 system for four times the price. It has a lousy BFTB. A rough guesstimate is that this system will end up around rank # 150 or worse on our PPBM5 Benchmark despite the massive amount spent.
PS. Don't shoot the messenger, shoot the decision maker.
Dont mind Harm. Its generally known he is biased against dual xeon systems.And guess which system he does have ......
Depending on what codec footage you edit and the kind of work you do, a powerful GPU and multicore CPUs power can come in handy. And if you can afford it, much the better. Bang for buck isnt always a wise guideline for purchasing equipment. How it fits your needs is sometimes more important. But if you a just doing weddings or anything but Red / Epic stuff, he may have a point
Most people that I know that are working professionally on a wide range of formats, are involved in motion graphics and make longer form projects will benefit from a more powerful system. Hobbyists maybe not so much.
Dont mind Harm. Its generally known he is biased against dual xeon systems.
That is only half of the story. I'm biased against Dell, HP, Boxx, Alienware etc. as well because they steal you blind if you want anything more that the base configuration, they deliver their stuff with crippled BIOS preventing you to overclock, they sometimes use non-standard PSU dimensions (HP) so you can't upgrade it, they do not offer sufficient expansion options, etc.
If dual Xeon systems were leading the pack in the benchmark, I would adjust my thinking, but they are nowhere comparable to a single CPU overclocked system. But the price is astronomically higher, especially from companies like Dell and HP.
I certainly agree about big box stores, that why I went to ADK and Puget eventually!
Some issues that somewhat negate your stance are ....most editors / facilities I know dont overclock (which is a moot point with E5).....current PPBM benchmarks do not reflect a work flow with Red / Epic / Arri / Alexa footage which for the "industry" are becoming a standard. They also dont take into account that lots of PrP editors do a lot of dynamic linking with AE.
So its really a matter of where you stand and what you do in this wide field known as video editing that is determinant of what you buy.
This is because the current PPBM5 benchmark concentrates on the most popular of HD and SD video formats at the time of the benchmark's development. Prior to PPBM5, previous versions of PPBM were strictly standard definition.
Harm and Bill have been working on a test that involves some of those higher formats. But to run those tests to anyone's satisfaction, both the disk system and the graphics and CPU subsystems must be able to keep up with such demands. As a result, any BFTB ratings will be completely ignored (read: thrown out the window) because such material requires a system that costs at least $25,000 (an amount that very, very few people are even willing to spend even if they can "afford" it) just to even work at all.
And normally, dual-CPU systems are slower than some single-CPU systems due to the extra latency caused by the switching and splitting of the single bus to two CPUs. That split is the weakest point in current dual-CPU systems.
I do agree with Harm that the Quadros are mostly a waste of money if one will only be working with Premiere Pro. However, After Effects does take some advantage of the more robust OpenGL performance of the Quadros. In certain OpenGL productivity apps, the GeForces (yes, even the very fastest, latest one) are significantly slower than even a relatively old, very slow (by today's standards) Quadro FX 580, let alone a Quadro 4000 or above.
Message was edited by: RjL190365
In addition to Randalls remark, there are practical considerations like:
We have to compromise.
Regarding how long it takes to run PPBM6, maybe running "too slow" for slower PCs need not be an issue. PPBM5 should work fine for their needs.
Or, for PPBM6, maybe a separate "large format" test (for RED, EPIC, etc.) with its own separate "large file" download could be implemented that could be considered optional in order for user's to turn in a test submission.
In any case, thanks for all the hard work that you do (you too Bill!) to support the PPBM franchise!
I can appreciate the constraints Harm and Bill have to deal with, with the large professional formats. But as Premiere gets more refined, its attracting the kind of crowd that uses them. If its not practical to run benchmarks, then we will have to acknowledge that the PPBM is not the final word in which systems to purchase since it cant reflect all the new work conditions that facilities and higher end freelancers have to deal with.
I would like to add one historical note.
PPBM when I developed it back in 2005 was designed as a hardware evaluation tool for Premiere users. I was unsatisfied with all the unfounded "theories" in the forum at that time on hardware configurations. We have made amazing strides since that time. Since we cannot possibly cover all formats, it will have to be up to the users to extarpolate. to many of the formats.
|Review Editing System|
|Case||ADK - ADK Tower: (8) 3.5" bays 6 are removable, (4) 5.25 Bays Firewire/USB2 in fr|
|Power Supply||Top Power - Striker 850 - 850W, up to 94% efficiency, 5 year Warranty|
|Motherboard||ADK - Core i7 SB-E, 4 PCIex16, 2 PCIe, up to 64Gig ram no firewire.|
|Processor||Intel - 6 Core i7 overclocked 4.5GHz or better with HT 12meg cache|
|Cooling||Intel - Intel Liquid cooler self contained unit (quiet)|
|Cooling 2||ADK - ADK Quiet Case fans (2) 8DB Noctua|
|Memory||32Gig (8x4gig)DDR3 1600 Low Voltage|
|Hard Drive 1||Intel - 480G 520 Series SSD: 550MB read/520 write|
|Hard Drive 2||Western Digital - 2000G Raid 0(2x 1TB 64Meg) 5 yr warranty|
|Hard Drive 3||Western Digital - 2000G Raid 0(2x 1TB 64Meg) 5 yr warranty|
|Hard Drive 4||None|
|Hard Drive 5||None|
|Video||GeForce GTX 680 4GB 256-bit GDDR5 PCI Express 3.0 Lifetime warranty.|
|Video 2||Blackmagic Design - DeckLink Duo|
|CD/CD-RW/DVD||Asus - BW-12B1ST Internal Blu-ray Writer|
|NIC||Included wired not wireless|
|Modem||SIIG - Firewire 2-port PCIe card. Firewire 1394a|
|Operating System||Microsoft - Windows 7 Pro 64 bit OEM|
|Other Software||Paragon Backup & Recovery 11 Suite with ADK recovery DVD.|
|Other Software 2||NONE|
|Other Software 3||NONE|
|Keyboards||Logitech - Cordless Desktop Optical: Cordless Internet KB and Cordless Optical Mouse.|
|Warranty||2 year parts and labor, onsite pickup, Lifetime tech support.|
OK How about this pc or go with same but xeons i do use after effects and Dynamic link alot
The questions is, do you for see editing large files like Red / Prores 4444 / Epic or a like. If so, you might need the power of the dual Xeon Sandy Bridge EP system. If not, the single SB should do it. Hey, if you are buying from ADK, Eric should be your spirital advisor on such matters. He is a very smart and friendly guy.
Sorry, until I switch Im a Mac guy switching to a Sandy Bridge Dual Xeon systems for reasons discussed above. It would be wise to call Eric who has much more intelligent things to say about it than I do.
Yes that is a nicely spec'd and fast machine for HD quality editing.
Remember speed is relative to the effects and transitions you use, size of the footage you edit.
Despite all the stuffas you hear from marketing the GPU still plays a fairly minor role as is it limited to a multi-camera mode, a few output codec's, rescaling & some effects. If you don't use these features then the work falls back to the CPU, only you really know your workflow, so if you use more CPU intensive work then go with the xeons as CS6 seems scale to ~12-16 real cores.
If you work with Cinema sized footage (3k-5k) then you'll want to consider having a robust disk subsystem. For smaller footage sizes (3k) target 600+ MB/sec'ish for reasonable playback 4-6 source disks. For 4-5k you'll wanna target about 1000-1500MB/Sec (8-12) source disks for good playback speed.
If you care about future proofing, look at the top-end of what is being tested/demo'd at the time of release of the software and buy one of those. You can generally expect the software to perform well for the next 2 versions..
To take it completely off topic, @lasvideo, cyber criminals generally view mac's as soft targets as a group the users don't run anti-virus. Mac's are 7x more likely to have malware than pc's.
Interesting theory gents, but in 4 years of Mac use I never had a problem. Eight years on a PC was fraught with issues. Some due to the protection software fighting the edit software. Id be willing to wager that if 1 million Mac users were interviewed you would have about 1% complain about virus/malware problems. Compare that to a projected 95% of PC users and I think I make a point on most folks experience with this stuff. Iknow its an Achilles heel of sensitivity, but it exists and its a constant PITA and issue. We can bicker about this till the cows come in, that doesnt change the nature of the beast.
From my perspective it works better on PC, going by the number of posts from MAC users. There may be other factors here, general lack of expertise of MAC users who don't know much about computers and expect everything to work after plugging into the wall outlet, having to get acquainted with using native formats instead of intermediate formats in either ProRes or QT, learning a new workflow, missing effects and transitions that are not available on MAC that are available on PC, and MAC's being slower and much more costly than equally equipped PC's, etc.
Not to get into a fighting war MAC - PC, it is your choice to go for one platform or the other. Some crave the MAC environment, others the Windows environment. So be it.
So what did you end up buying, and how is it working out? How much did you spend US dollars?
I'm in the same boat right now, and I don't like the processors DELL is locking me into on the T7600. It seems over priced.
Europe, Middle East and Africa