i am using the i1display to try and calibrate my 30" cinema display.
i am using all standard settings:
(tried both D65 and Native white points)
used the largest patch set provided with the software.
after calibrating it as if it's not perfect.
than i ran a delta E check with the i1profiler and got poor results.
(i'm attaching the results page)
i understood that a reasonable average delta e should be under 1.5-2
You cannot attach any file to your posts.
You can embed an image in your post by using the camera icon in the Reply Bar Editor through the forum's web interface:
Sorry, I have no experience with CCFL monitors, so I wouldn't presume to comment on the ΔE values for LEDs or LCDs.
I'm spoiled by the ΔE values I've been getting with my ancient but scrupulously maintained and regularly calibrated CRT monitors. Here are some old screen shots:
The corrections by calibration (using look-up-tables, LUTs) should be
One has to adjust the monitor manually very near to the desired profile.
The rest is done by the calibration system (which should offer guidance
how to pre-adjust manually).
That's the final LUT adjustment (very little deviation from the straight line):
Actually the result for an old LaCie CRT monitor (my communication
computer), from 2008, still valid today for practical purposes...
Screenshots shouldn't be published as JPG but as GIF or PNG-8.
Best regards --Gernot Hoffmann
Europe, Middle East and Africa