I am working with 6.0, Footage is P2, Sequence is Black Magic Progressive @ 29.97 / 1920x1080. Black Magic board is Decklink 3d Extreme.
Black Magic Drop Down in "New Sequence Setting Box" shows no 1280x1080 option which is P2. All Black Magic options are 1920x1080, progressive or interlaced.
When I drop the Warp Stabilizer onto a clip (P2) I get the message:
"Warp Stabilizer requires clip dimensions to match sequence"
How do I get around this, using the Black Magic Sequence and P2 footage?
Forgive my lack of understanding. I am driving outboard monitors with the Black Magic Card, ie. via SDI and HDMI.
When I use a non-BM Sequence I lose output to these monitors. What am I missing here?
Please pardon my ignorance.
With CS6, you shouldn't. Any sequence should output via the hardware just fine. Though I've never used that hardware, so I can't comment specifically on how to get that going. See if this helps.
So I'm watching the video above and find that the only "Setup" menu I can access on the Video Device setup in the Playback screen of preferences is the Adobe DV selection. I have Blackmagic Playback selected, but there is no setup menu as in the Bluefish device in the video. Should I have a "setup" menu for the black magic card?
I also just checked the BlackMagic driver. The version now installed is 184.108.40.206 and I see that there is a 9.7.1 available.
Does anyone with experience with these drivers know if this will fix my problem?