Trying to start up the CS6 trial on a mac running OS X 10.7.3, I get the following message: "Unable to set maximum number of files to be opened." After clicking "OK" on that dialog, Illustrator quits. Illustrator CS5 runs perfectly, as does Photoshop CS6 trial.
Searching for this error showed other people having this on much earlier versions of Illustrator as a result of their maxfiles limit being set too low. The suggested fix was removing /etc/launchctl.conf to unset the limit.
Running `launchctl limit` show my maxfiles hard and soft limits are 10,000. I do not have an /etc/launchctl.conf file, and running `mdfind launchctl` doesn't show any other config files with that name sitting elsewhere (like in /private). Finally, I've run Repair Disk Permissions.
If anyone has ideas on what I can do to get Illustrator running on my computer, I'd appreciate it.
Just for confirmation. The build is installed on your machine is the official Illustrator CS6 trial that Adobe made avaliable for download today at this page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=illustrator&loc=en _us ?
Did you try to trash preferences or reinstall Illustrator CS6? Does the problem persist?
I didn't install the version from that link, but I did install the official release of CS6 Web and Design Premium, and the application version is 16.0.0. I both trashed the CS6 preferences and reinstalled Illustrator CS6, and I get the same error message.
I´m in contact with an engineer from Adobe Illustrator Team.
Could you please tell us if the SMART Product Drivers 10.6 are installed on your systems? http://smarttech.com/us/Support/Browse+Support/Support+Documents/KB3/1 46595.aspx
Also...could you please tell us if it happens to old Illustrator version?
This info will help the engineer to find the problem.
Thank you a lot
This is a note from the engineer:
"Launch terminal window on your Mac and type in ulimit. If you get anything other than unlimited you should change it back to unlimited. There are plenty of web resources that you can use to find out more about this command and how to change it or you can ask on one of the MAC forums.
If you see the value unlimited and still see the error you should report back the bug to Adobe: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I'm having this exact problem with my newly downloaded Illustrator CS6. It worked all day yesterday, and today I have this message. Tried all the terminal commands as instructed above and no change.
CS 5.1 is working fine.
Any update on this issue is much needed.
Glad to see it works for you.
I reccomended a new user account to remove few variables. I have tried this on numerious occasions when I see something weird happening only for me. If it runs fine under new account that means you need to review one of the softwares in your startup or some MAC OS settings. Troubleshooting this may take lot of time, If you are short on time maybe you should just copy files from the old account and start using the new one.
-- All the best
I also encountered this issue on MAC OSX 10.7. I tried many hit and trials and finally found a way to launch Ai, though it is just a workaround. I followed these steps:
1. I created shell script which can launch Ai. You can download this shell script from the location: http://dl.dropbox.com/u/47167182/launchAI.command.zip.
2. Unzip the folder and drag the launchAI.command file into your dock area. (Please verify the application path, since I have installed AICS6 on default location)
3. Click launchAI.command icon in the dock.
4. A terminal will appear asking your user password, enter your password to see if AI launches successfully.
5. If you don't like typing password for each run, you can edit /etc/sudoers file to add a line "%staff ALL=(ALL) NOPASSWD: ALL" . (Replace staff with your user's group name).
Please see if this workaround also works for you.
All the best!
@Nick320: Even reinstalling 10.6 would have worked or just creating a new account. Most of these issues impacting few users are related to OS settings.During the course of our working we install many softwares and few of these even change the default settings at times we also change settings that we do not recall changing.
Creative_nick, that script works perfectly. That's really strange, what is different about how this is being launched versus just launching the app normally? BTW, during launch I get this error in the terminal window:
2012-05-18 06:57:59.647 Adobe Illustrator[69428:3e03] CFURLCreateWithString was passed this invalid URL string: '/System/Library/Frameworks/' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
2012-05-18 06:58:22.879 CS6ServiceManager[69443:a03] *** CFMessagePort: bootstrap_register(): failed 1100 (0x44c) 'Permission denied', port = 0x1d03, name = 'com.adobe.csi.CSServiceManager.3'
See /usr/include/servers/bootstrap_defs.h for the error codes.
Ian: is is very difficult to pin point the software that would have modified it. I suggest you should have a look at all applications or hardware installed and most likely culprit could be products that deal with databases, network operations or file management systems. Cant really tell as we do not have this issue at computers at our office.
This all is related to permissions that are avaialable to the process. When you launch the app with terminal (with the script that I provided), AI is invoked through shell and inherits the shell quota. It also gets sudo permissions so that AI is now able to change the limit of number of open files.
CS6ServiceManager[69443:a03] *** CFMessagePort: bootstrap_register(): failed 1100 (0x44c) 'Permission denied', port = 0x1d03, name = 'com.adobe.csi.CSServiceManager.3'
Ian, Did you deny participating in Adobe PIP (Product Improvement Plan)? I have seen such an error in that case.
do you have any suggestions on where to start looking for software that would modify this max open files option? My OS is the latest version (10.7.4).
@Ian: Please look for files /etc/launchd.conf, $HOME/.launchd.conf or /etc/sysctl.conf. These are the common files where the limit may exist.
Thanks Nick. I couldn't find any of these files (and yes I knew to make sure the system files were visible to search in them). In the mean time I will keep using your script solution right now. It works and that's all I wanted. Cheers!
I had the same problem after upgrading from CS5 to CS6. I found this solution: http://www.smarttech.com/us/Support/Browse+Support/Support+Documents/K B3/146595.aspx
This solved my problem
I really really really REALLY hope that Adobe is paying attention to this issue.
I've now had this issue happen intermintantly on two different computer, neither of which have ever had the SMART software installed on them and neither that appear to to have the launchd.conf or sysctl.conf (unless I'm missing some kind of setting to reveal this files, but I doubt it as I'm going through terminal on an admin account).
One of the computers is essentially a totally clean instal with nothing on it other than MS Office and Adobe CS 6.
Thankfully the script Nick made is working, but its crazy to have to resort to this.
@amco: create a new user account and run Ai after logging into it. does it work. At times we think our machines are clean but softwares do get installed on our machines e.g unknown ones like device drivers or known ones like MS office. One thing is however certain Adobe enginers did not enocounter this before they shipped it.
The script launches Illustrator just fine.
I had this issue when I first installed CS6, but after a restart, Ai started working normally. I go to launch it today, and I get the error at startup again. BUT, this screipt works -- now Adobe just needs to figure out what's going on instead of putting the brunt of the work on us. CS5 Ai works just fine. I don't -- and never have -- had Smart installed, nor any app like it.
I receive the following Terminal error when I use the script:
2012-05-24 08:34:34.189 Adobe Illustrator[56601:3e03] CFURLCreateWithString was passed this invalid URL string: '/System/Library/Frameworks/' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
2012-05-24 08:34:38.874 CS6ServiceManager[56607:a03] *** CFMessagePort: bootstrap_register(): failed 1100 (0x44c) 'Permission denied', port = 0x1d03, name = 'com.adobe.csi.CSServiceManager.3'
See /usr/include/servers/bootstrap_defs.h for the error codes.
Strangly enough, the problem seems to have fixed itself at some point. Maybe after a restart, not really sure. But my preferences were all reset which is fine, but now I don't have to use that terminal command.
Thought I'd consolidate the useful replies to the OP, and add the inputs I've received form the Illustrator Engineering team.
On Mac OS, Illustrator usually launches with normal user account permissions (non-privileged). To maximize performance, Illustrator tries to increase the maximum number of files to be opened. Mac OS does not restrict or limit Illustrator from increasing the maximum number of files that can be opened. However, a system administrator or third party software may place such restrictions on the maximum number of files that can be opened by a process, by adding a system preference to configuration files.
When such a file limit setting is enforced, a process like Illustrator that is starting with normal user account permissions fails to launch.
The possibility of such a system preference being added to your configuration files is higher if you have installed SMART Product Drivers 10.6 (See KB article http://www.smarttech.com/us/Support/Browse+Support/Support+Documents/K B3/146595.aspx). But, here's a procedure to isolate and fix the problem even if it is not SMART product drivers that tweaked this system preference.
You need to first check for the file limit system preference, and then try solution 1 or 2.
Check if your computer has this system preference:
Solution 1: If the system preference exists on your computer:
Solution 2: If the system preference does not exist on your computer:
If you don't like typing your password every time you launch Illustrator:
%staff ALL=(ALL) NOPASSWD: ALL
We know how to work around the issue, and launch illustrator with a shell script as root user. But that is merely a workaround and does not fix the issue...
Fact is that under my normal user account, I have NO file limit setting of any kind:
bert@bertbookpro ~> ulimit unlimited
But still I get the error message displaying the "Unable to set maximum number of files to be opened" error, while I have no files that exists where the ulimit setting could be present:
bert@bertbookpro ~> cat /etc/launchd.conf cat: /etc/launchd.conf: No such file or directory bert@bertbookpro ~> cat ~/.launchd.conf cat: /Users/bert/.launchd.conf: No such file or directory bert@bertbookpro ~> cat /etc/sysctl.conf cat: /etc/sysctl.conf: No such file or directory
(which means that this solution also does not work)
THAT is the core problem, so there has to be a real solution to this instead of a workaround, so I can run Illustrator under my normal user account...
Europe, Middle East and Africa