Adobe Community : All Content - All Communities

How do I get flex remoting to work with Coldfusion 11

forums_noreply@adobe.com — Fri, 16 May 2014 20:47:58 GMT

Hi,

Coldfusion 11 (Developer)

Flex 3

Existing Flash Application works with Coldfusion 8

Flex Integration is turned on.

Running latest update

CentOS 6.1 with latest updates

I have done the following:

http://127.0.01/flashservices/gateway ---> Page Not found

http://127.0.01/flashservices/gateway/ ---> Page Not found

http://forums.adobe.com/message/5621721#5621721

Confusion Blog » Apache + Debian + Coldfusion 10 + flex2gateway = Error 404

https://groups.google.com/forum/#!topic/railo/6j2i6gl8Ac4

\config\wsconfig\1\uriworkermap.properties file to include:

/flashservices/gateway/* = cfusion

/flashservices/gateway = cfusion

I have modified the mod_jk.conf like so:

# Select the timestamp log format

JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "

# Fix para Flex2gateway

JkMount /*.cfm ajp13

JkMount /*.cfc ajp13

JkMount /*.do ajp13

JkMount /*.jsp ajp13

JkMount /*.cfchart ajp13

JkMount /*.cfres ajp13

JkMount /*.cfm/* ajp13

JkMount /*.cfml/* ajp13

JkMountCopy all

</IfModule>

AddHandler jakarta-servlet .cfm .cfml .cfc .cfr .cfswf

Alias /CFIDE "/opt/coldfusion10/cfusion/wwwroot/CFIDE"

I uncommented the "start flex 2" section in web.xml

Nothing has worked.

I have searched Google and Adobe.

I was hoping that Adobe would have the "Flex Integration Check Box" working

by now. It only been around since ColdFusion 8 and basically does nothing.

Adobe could post a tutorizl on how to get this working.

Job Security for "Tech Support".

Any ideas.

Brian

Enable RMI over SSL for Data Management Problems

forums_noreply@adobe.com — Tue, 18 Feb 2014 17:49:26 GMT

I am running the following:

ColdFusion 8 Developer /Enterprise

RedHat Linux Enterprise 6.0

Apache is my webserver

The JRE is what came with ColdFusion

I am trying to Enable SSL connection between Flex/Flash Application

and Coldfsuion.

I followed the direction outlined in:

http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=UseFlexDataService_09.ht ml

However, when I get to:

Flex Integration:

keytool -export -v -alias FlexAssembler -keystore cf.keystore -rfc -file cf.cer

I get a Java IOException: Keystore was tampered with, or password was incorrect.

The password is correct. The file is on a closed system, so nobody has tampered with

the file.

I assume I am supposed to import the certificated into

/opt/coldfusion8/funtime/jre/lib/security/cacerts

I have tried removing the "JRE cacerts" file, but that failed.

As suggested by another website.

Any ideas.

Brian

accordion problems

forums_noreply@adobe.com — Mon, 06 Jan 2014 21:29:08 GMT

Hi,

I have a fresh install ColdFusion 10 (latest updates)

On a RedHat 6.1,6.2,6.3,6.4 Servers.

Using Apache as a webserver.

I can't get the following test code (Test 1 and Test 2)

working. Both are provided by Adobe.

I have tried https://cf.supportobjective.com/, no help.

Does anyone know how to get ColdFusion working?

The tests work with ColdFusion 8.01.

Brian Erickson

</cfif>

<br>

<cfinput type="text" required="Yes" name="firstName" label="First"

value="" width="100"/>

<cfinput type="text" required="Yes" name="lastName" label="Last"

value="" width="100"/>

</cfformgroup>

Flash fills this field in automatically.

You can replace the text.

</font></textformat>

</cfformitem>

<!--- The bind attribute gets the field contents from the firstName

and lastName fields as they get filled in. --->

<cfinput type="text" name="email" label="email"

bind="{firstName.text}.{lastName.text}@mm.com">

<cfinput type="text" name="phone" validate="telephone" required="no"

label="Phone Number">

</cfformgroup>

<b>Tell us your preferences</b>

</cfformitem>

Pets:

</cfformitem>

<cfinput type="Radio" name="pets" label="Dogs" value="Dogs"

checked>

</cfformgroup>

Fruits:

</cfformitem>

<--- Flash requires unique names for all controls. --->

<cfinput type = "Checkbox" name="chk1" Label="Apples"

value="Apples">

<cfinput type="Checkbox" name="chk2" Label="Bananas"

value="Bananas">

<cfinput type="Checkbox" name="chk3" Label="Pears"

value="Pears">

<cfinput type="Checkbox" name="chk4" Label="Oranges"

value="Oranges">

<cfinput type="Checkbox" name="chk5" Label="Grapes"

value="Grapes">

<cfinput type="Checkbox" name="chk6" Label="Kumquats"

value="Cumquats">

</cfformgroup>

</cfformgroup>

</cfform>

<!---

http://help.adobe.com/en_US/ColdFusion/10.0/Developing/WSc3ff6d0ea7785 9461172e0811cbec10372-7ff4.html#WSc3ff6d0ea77859461172e0811cbec22c24-7 30c

--->

<html>

<head>

</head>

<body>

Flash form with formatted text and rules

</cfformitem>

This form has formatted text, including:</font></b><br>

<li>colored text</li>

<li><i>italic and bold text</i></li>

<li>a bulleted list in an indented block</li>

</textformat>

<p><b>The text is preceded and followed by horizontal rules</b></p>

It also has a link to a web page.</b><br>

This link displays the Adobe home page in a new browser window

</u></font></a>

</cfformitem>

</cfform>

</body>

</html>

Flex2Gateway failed 404

forums_noreply@adobe.com — Mon, 06 Jan 2014 21:45:38 GMT

Hi,

I have a fresh clean install of coldfusion 10 (latest updates)

running on a RedHat 6.1,6.2,6.3,6.4 servers.

I have been trying to get 127.0.0.1/flex2gateway/ to work but get 404

I have performed a the recommended solutions

http://inflagrantedelicto.memoryspiral.com/2012/12/flashservicesgateway-and-coldfusion-10/

Still no success.

Any ideas

Brian Erickson

Upgrading from Coldfusion 8 to 10, Flex won't work

forums_noreply@adobe.com — Thu, 21 Nov 2013 00:53:01 GMT

Coldfusion 10

Flex 3

Existing Flash Application works with Coldfusion 8

Flex Integration is turned on.

Running latest update 12

Linux Machine

When I bring up the application I get the following error:

mx.messaging.channels::AMFChannel)#3

initialDestinationId = (null)

messageAgents = (Array)#8

[0] (mx.rpc::AsyncRequest)#9

authenticated = false

autoConnect = true

channelSet = (mx.messaging::ChannelSet)#5

clientId = (null)

connected = false

defaultHeaders = (null)

destination = "ColdFusion"

id = "2E20487A-B02C-CB91-E9B5-78116236D96C"

reconnectAttempts = 0

reconnectInterval = 0

requestTimeout = -1

subtopic = ""

connected = false

connectTimeout = -1

enableSmallMessages = true

endpoint = "http://192.168.0.17/flex2gateway/"

failoverURIs = (Array)#10

id = "my-cfamf"

mpiEnabled = false

netConnection = (flash.net::NetConnection)#11

client = (mx.messaging.channels::AMFChannel)#3

connected = false

objectEncoding = 3

proxyType = "none"

uri = "http://192.168.0.17/flex2gateway/"

piggybackingEnabled = false

polling = false

pollingEnabled = false

pollingInterval = 3000

protocol = "http"

reconnecting = false

recordMessageSizes = false

recordMessageTimes = false

requestTimeout = -1

uri =

etc...

I have done the following:
http://192.168.0.17/flashservices/gateway ---> Page Not found
http://192.168.0.17/flashservices/gateway/ ---> Page Not found

http://forums.adobe.com/message/5621721#5621721

Brian

ColdFusion 10 Accordian no text displayed

forums_noreply@adobe.com — Thu, 14 Nov 2013 01:12:26 GMT

I created a file using Adobe sample code, all I get

is a spin wheel. No text.

The server has no load on CPU,memory, or network.

I am running RedHat Linux 6.4

Coldfusion 10 with latest updates.

I have turned on Flex Intergration.

Any ideas?

Brian

<!---

http://help.adobe.com/en_US/ColdFusion/10.0/Developing/WSc3ff6d0ea77859461172e0811cbec1037 2-7ff4.html#WSc3ff6d0ea77859461172e0811cbec22c24-730c

--->

<html>

<head>

</head>

<body>

Flash form with formatted text and rules

</cfformitem>

This form has formatted text, including:</font></b><br>

<li>colored text</li>

<li><i>italic and bold text</i></li>

<li>a bulleted list in an indented block</li>

</textformat>

<p><b>The text is preceded and followed by horizontal rules</b></p>

It also has a link to a web page.</b><br>

This link displays the Adobe home page in a new browser window

</u></font></a>

</cfformitem>

</cfform>

</body>

</html>

Flash and cflock

forums_noreply@adobe.com — Fri, 20 Apr 2012 22:41:29 GMT

Running Coldfusion8

Flex 3

I am trying to do a cflock (either session or application) in a function.

I get the error message:

"Cannot use cflock to lock the application or session shared scopes without these scopes being established through the use of the cfapplication tag. To use the session scope you need to enable session management. Application and/or Session variables must also be enabled in the ColdFusion Administrator."

faultString = "Unable to invoke CFC - Cannot lock Application scope."

Session management is enabled in both the administrator and Application.cfc.

I am thinking that RemoteObject is not going though the "Application.cfc" and is

just doing a direct call to the ColdFusion Component.

How do I get thread-safe removeobject calls?

Any ideas how to resolve this problem?

Flash to connect to Coldfusion over HTTPS/SSL

forums_noreply@adobe.com — Tue, 06 Dec 2011 22:33:32 GMT

I have been looking in the cfserver.log Everytime I try to

run the Flash Application on the production server.

I get the following error.

12/06 14:22:42 error
572	java.lang.NullPointerException
573	at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:285)
574	at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
575	at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
576	at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
577	at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
578	at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
579	at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

I have followed the direction outline in here:

http://www.cftips.net/post.cfm/flex-remoteobject-remoting-over-ssl

I am running Coldfusion 8, Flex 3, Apache Webserver on a Suse Linux

box.

Any ideas?

Please.

passing parameters from html to flex application

forums_noreply@adobe.com — Sat, 18 Jun 2011 00:48:19 GMT

I am using flex Builder 3. using ActionScript 3

I am trying to pass html parameters via the flashVars outline in

the help:

http://livedocs.adobe.com/flex/3/html/help.html?content=passingarguments_3.html

Problem:

Application.application.parameters equals null

root is equal to null (I know discontinued in AS3)

loaderInfo is equal to null.

I am looking at values via the debugger at a break point in

creationComplete and initialize.

I have modify the html wrapper to for each case outline in the help.

Any ideas as to what I am doing wrong?

code:

 private function init():void
{
       for (var i:String in Application.application.parameters) {
          ta1.text += i + ":" + Application.application.parameters[i] + "\n";
}

Brian
     }

Printing a Flex Component

forums_noreply@adobe.com — Fri, 29 Apr 2011 16:20:57 GMT

I am trying to print a component with a datagrid(print version) and panels.

However, all I get is the uppper left corner with some of the controls filled.

How do I get multiple pages?

I have tried the following code segments:

package
{
    import flash.printing.PrintJob;
    import flash.display.Sprite;

    public class BasicPrintExample extends Sprite
    {
        var myPrintJob:PrintJob = new PrintJob();
        var mySprite:Sprite = new Sprite();

        public function BasicPrintExample()
        {
            myPrintJob.start();
            myPrintJob.addPage(mySprite);
            myPrintJob.send();
        }
    }
}
and the following data grid centric:

// The function to print the output.
        public function doPrint():void {

            var printJob:FlexPrintJob = new FlexPrintJob();
            if (printJob.start()) {
                // Create a FormPrintView control as a child of the current view.
                var thePrintView:FormPrintView = new FormPrintView();
               Application.application.addChild(thePrintView);

                //Set the print view properties.
                thePrintView.width=printJob.pageWidth;
                thePrintView.height=printJob.pageHeight;
                thePrintView.prodTotal = prodTotal;
                // Set the data provider of the FormPrintView component's data grid
                // to be the data provider of the displayed data grid.
                thePrintView.myDataGrid.dataProvider = myDataGrid.dataProvider;
                // Create a single-page image.
                thePrintView.showPage("single");
                // If the print image's data grid can hold all the provider's rows,
                // add the page to the print job.
                if(!thePrintView.myDataGrid.validNextPage)
                {
                    printJob.addObject(thePrintView);
                }
                // Otherwise, the job requires multiple pages.
                else
                {
                    // Create the first page and add it to the print job.
                    thePrintView.showPage("first");
                    printJob.addObject(thePrintView);
                    thePrintView.pageNumber++;
                    // Loop through the following code until all pages are queued.
                    while(true)
                    {
                        // Move the next page of data to the top of the print grid.
                        thePrintView.myDataGrid.nextPage();
                        thePrintView.showPage("last");
                        // If the page holds the remaining data, or if the last page
                        // was completely filled by the last grid data, queue it for printing.
                        // Test if there is data for another PrintDataGrid page.
                        if(!thePrintView.myDataGrid.validNextPage)
                        {
                            // This is the last page; queue it and exit the print loop.
                            printJob.addObject(thePrintView);
                            break;
                        }
                        else
                        // This is not the last page. Queue a middle page.
                        {
                            thePrintView.showPage("middle");
                            printJob.addObject(thePrintView);
                            thePrintView.pageNumber++;
                        }
                    }
                }
                // All pages are queued; remove the FormPrintView control to free memory.
                Application.application.removeChild(thePrintView);
            }
            // Send the job to the printer.
            printJob.send();
        }

cfpdf extract the table of contents from a pdf

forums_noreply@adobe.com — Fri, 08 Oct 2010 22:33:23 GMT

Is there a way to extract the "table of contents" from a

pdf using coldfusion?

Does an example exist?

CFPDF doesn't work with color managed pdfs

forums_noreply@adobe.com — Fri, 17 Sep 2010 16:32:29 GMT

I am using ColdFusion 8 on Linux 64-bit.

Flex 3 on Windows.

I am doing the following:

This works fine on Bitonal and Greyscale pdfs and

some color pdfs, but produces garbage when

color management feature of PDF is being used.

Any ideas on how to solve the problem?

Flex to CF remote object call, no result and no fault

forums_noreply@adobe.com — Wed, 01 Sep 2010 22:31:24 GMT

I am using flex 3 connecting to ColdFusion 8.

When I call a member of a ColdFusion Object from Flex using

RemoteObject, I don't get a result and the fault function is not called.

This happens sporadically.

Sometimes the Popup Window displays data and sometimes the

Popup doesn't.

The function names match in case.

If I place a cfabort in the ColdFusion function, abort gets called everytime.

Any ideas on how track this down?

Modules and view stack

forums_noreply@adobe.com — Thu, 29 Jul 2010 16:51:07 GMT

I am tring tto implement a ViewStack with multiple views inside a separate module.

Simular to Windows style "wizard" (property Sheet / Property Page).

When I complie the module and run swf. I get a colored background.

No Image, no canvas.

Code Sample:

<?xml version="1.0" encoding="utf-8"?>
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml"
    layout="vertical"
    width="100%"
    height="100%"
    xmlns:BookDetail="Modules.BookService.src.views.*"
    backgroundColor="#ff0000">

    <mx:Canvas width="100%" height="100%">
        <mx:ViewStack xmlns:mx="http://www.adobe.com/2006/mxml"
            xmlns:BookDetail="Modules.BookService.src.views.*"
            selectedIndex="0"
            resizeToContent="true"
            >
            <BookDetail:Main id="MainHome" width="100%" height="100%"/>
        </mx:ViewStack>
    </mx:Canvas>
</mx:Module>

What am I doing wrong?

cfpdf thumbnails

forums_noreply@adobe.com — Tue, 15 Jun 2010 22:43:58 GMT

I am using ColdFusion 8 on Linux 64-bit.

Flex 3 on Windows.

I am doing the following:

This works fine with CFML 8 documentation pdf.

When I try "cfpdf", with a PDF that contains a collection of full-color photographs,

the resulting thumbnails look like abstract art.

(The file "SrcFileName" is a valid pdf viewable in Acrobat.)

Is there a work around?

I haven't found anything in the HotFixes.

Flex SDK pdf class and ColdFusion 9

forums_noreply@adobe.com — Tue, 15 Jun 2010 22:34:56 GMT

Regarding the Pdf class (which is wrapper for ColdFusion 9's cfpdf).

I am trying to determine if it is worth upgrading to Flash Builder 4, just

to use the Pdf class.

How well does the Pdf class work?

When generating thumbnails, does the Pdf class rasterized pdf page?

Does Pdf class require an image object to display the Thumbnail page?

Any opinions?

Does Embedded Fonts in Flash Builder 4 work?

forums_noreply@adobe.com — Fri, 11 Jun 2010 16:59:52 GMT

Does emmbedded fonts actually "work" (display) in Flash Builder 4?

Reason I am asking, I tried to embed fonts in Flex 3, but no success.

FYI:

It was an open license True-Type Font.

I followed this tutorial

http://carvalhar.com/#/en/blog/190/embedding-fonts-flex/

Also, Adobe's Flex in a Week videos.

Used this function:

To determine if the Font was embedded, and the font was "embedded".

However, the font was not display.

cfthread problem

forums_noreply@adobe.com — Thu, 20 May 2010 17:04:08 GMT

ColdFusion 8

I using cfthread to loop until a file show up on "Processing Server" and download the file.

(The file is uploaded to a "Processing Server". The "Processing Server" processes the file

and places the file into another directory. Where I hope retrieve the file.)

For testing purposes there is a file in the directory.

According to "Server Monitor",-Statistics tab - Active ColdFusion Threads, the threads are starting and running,

but I don't see data, results or output.

However, the file is never downloaded.

Is there someway of tracing a thread?

Some tool in the "ColdFusion Administrator" to help.

Debugging is enabled.

ColdFusion Administrator - Server Error

forums_noreply@adobe.com — Fri, 05 Mar 2010 21:50:49 GMT

System:

SUSE Linux Enterprise 10.2 64-bit

ColdFusion 8 Enterprise 64-bit

Had to uninstall and re-install ColdFusion.

After the re-install of ColdFusion, I tried to deploy

another ColdFusion Archive, via the "ColdFusion Administrator"

The "Select File on Server" page display "Server Error: I/O error on server communication"

No messages are sent to any of the log files.

Any thoughts

PDF Verification (pre-flight)

forums_noreply@adobe.com — Mon, 26 Oct 2009 16:37:53 GMT

Running:

Suse Linux 10

ColdFusion 8 (64-bit version)

Couls some recommend a Pre-Flight (PDF Validation) software package

that will do the following at least:

1) Verify that the PDF file is valid

2) fonts are embedded

3) the images in the file are at least 300 dpi

Using ColdFusion to determine if a pdf has embedded fonts

forums_noreply@adobe.com — Wed, 21 Oct 2009 20:52:54 GMT

I am using ColdFusion 8.

Is there a way to determine the following:

1) A PDF has embedded fonts

2) the DPI of the images in a PDF

Do I need to upgrade to ColdFusion 9?

Embeded Fonts

forums_noreply@adobe.com — Wed, 05 Aug 2009 23:38:24 GMT

I am trying to embed a font into Flash web application using Flex Builder 3 on Windows XP 64-bit.

Font: FranKleinBold and and FranKleinMedium

located: http://www.dafont.com/franklein.font

I have followed the instructions outlined in "Flex in a Week - Embedding fonts" - didn't work.

I have tried both the css and the "Bindalbe with a Font Class" versions.

I have also tried the font installed and "not installed"

My application.css code:

@font-face
{
    /* src: local("FranKleinMedium"); */
/*     src:url("C:/adobeFlexTraining/Fonts/FranKleinMedium.ttf"); */
    font-family: "fontFranKleinMedium";
     src: url("assets/FranKleinMedium.ttf");
/*     src: system("FranKleinMedium"); */
    font-weight: normal;
}

@font-face
{
    /* src:url("C:/adobeFlexTraining/Fonts/FranKleinBold.ttf"); */
    font-family: "fontFranKleinBold";
    src: url("assets/FranKleinBold.ttf");
     /* font-weight: bold; */
}
.fontFranKleinMedium {
    embedFonts: true;
    font-family:    fontFranKleinMedium;
}

global {
    font-family: fontFranKleinMedium;
    color: #FFFFFF;
    fontSize: 16;
}

I also ran the following code:

            private function displayEmbeddedFont(name:String):void {
                var font:Object = systemManager.embeddedFontList[name];
                Alert.show(ObjectUtil.toString(font), name + ":");
            }
            private function initControl():void
            {
                 displayEmbeddedFont('fontFranKleinMedium');
                 displayEmbeddedFont('fontFranKleinBold');
             }

Both fonts are stated to be embedded, but the "FranKleinBold" is flagged as bold=false.

Any ideas as to why the font is not showing up as "times roman"

Less than operator compile bug?

forums_noreply@adobe.com — Fri, 24 Jul 2009 18:22:25 GMT

Hello,

I get a "invalid character or markup found in script block. Try surrounding your code with a CDATA block." complier error.

In the following code. When I remove the less than operator "<" and use any other comparison operator, the code

complies correctly no problem.

I haven't found a patch or service pack to fix the problem.

Q: Is there a work around?

Code Sample:

    <mx:Script>
             private function traceDisplayList(container:DisplayObjectContainer, indentString:String = ""):void
        {
         var child:DisplayObject;
         for (var i:uint=0; (i < container.numChildren); i++)
            {
            child = container.getChildAt(i);
         trace(indentString, child, child.name);
         if (container.getChildAt(i) is DisplayObjectContainer)
        {
            traceDisplayList(DisplayObjectContainer(child), indentString + "    ")

}

             }
        }
     </mx:Script>

Platform:

Flex Builder 3
Version: 3.0.214193

Eclipse Platform

Version: 3.3.1.R33x_r20070911-_19UEkpF-B7Uh2hKy75y
Build id: M20070921-1145

OS: Windows Vista

Flex Builder 3 try to connect to ColdFusion 8

forums_noreply@adobe.com — Fri, 26 Jun 2009 22:39:56 GMT

Setup:

ColdFusion 8 Developer - running on a RedHat Linux

Flex Build 3 Trail - running on Window Vista

How do I set up Flex Builder 3 to connect to a ColdFusion's CFC, without installing

everything locally?

I have tried the following:

1) http://www.adobe.com/devnet/flex/articles/coldfusionflex_part3.html

2) http://www.adobe.com/devnet/flex/flex_cf.html

3) ActionScript 3.0 Cookbook

Development ColdFusion Debug IP addresses

forums_noreply@adobe.com — Mon, 09 Mar 2009 21:39:51 GMT

The ColdFusion Developer's Edition has a two IP connection limit
(Excluding local 127.0.0.1).

The company has moved and reconfigured networks and now
I am unable to access the machine externally.

Is there any way to reset the two IP addresses, so the Development Machine can be
accessed externally?
I am not trying to bypass the Development Edition two IP address limit.

Remote Flash no results

forums_noreply@adobe.com — Thu, 04 Sep 2008 21:05:38 GMT

Problem:
I call a function "getContactInfo" in a CFC on the server using Flash Remote, but I get no response back.
I don't get any error messages.

Platiform:
Fedora Linux
ColdFusion 8.01 Developer's Edition 32-bit

Design:
When a user selects an item in a "tree" the selected item's data is sent to the server for a query.
The query is sent back to Browser to fill in a series of text boxes.

Questions:
1) Is there any configuration in the ColdFusion Administrator to enable Remote Flash?
2) Where should I be looking for a error messages?
(other than flash.log)
3) What am I doing wrong?

I have gone through the various tutorials on Flash Remote.

Code snippet:
<cfform name='MailingList' format="flash" onload="formOnLoad()" >
<cfformitem type="script">
public function formOnLoad():Void{
setUpRemoting();
}
public function setUpRemoting():Void
{
<cfoutput>
var connection:mx.remoting.Connection = mx.remoting.NetServices.createGatewayConnection(" http://#cgi.HTTP_HOST#/services/");
var componentPath:String = "services.Sample";
var listingService:mx.remoting.NetServiceProxy;
</cfoutput>
var responseHandler:Object = {};


var contactList:mx.controls.Tree = contactList;

responseHandler.onResult = function( results: Object ):Void
{
alert("Got Here");
}
responseHandler.create_Result = function( results: Object ):Void
{
alert("Got Here");
}
responseHandler.update_Result = function( results: Object ):Void
{
alert("Got Here");
}
responseHandler.remove_Result = function( results: Object ):Void
{
alert("Got Here");
}
responseHandler.onStatus = function( stat: Object ):Void
{
alert("Got Here");
}
MailingList.listingService = connection.getService(componentPath, responseHandler );
}

public function listingTreeChanged():Void
{
var sSelected:String;

sSelected = contactList.selectedNode.getProperty('data').value;
MailingList.listingService.getContactInfo(sSelected);
alert(sSelected);
contactList.setFocus();
}
</cfformitem>

<cftree name="contactList" lookAndFeel="motif" onchange="listingTreeChanged()">
<cftreeitem value="Test" display="Test" expand="no">
</cftree>

How-to cfpdfform pre-fill a pdf form

forums_noreply@adobe.com — Thu, 28 Aug 2008 22:14:38 GMT

I am trying to pre-populate a pdf form with xml data.

I found an example of how-to extract data from a form called "cfpdform-xmldata-read.zip",
but I want to pre-populate the form with existing data.

The command I am using is:
<cfpdfform source="TestForm.pdf" action="populate" xmldata="xmldata.xml" />

It doesn't work, the pdf is just copied over, without filling the fields.
The data format should be identical.

I am running:
ColdFusion 8.01 Developer's Edition on Linux.

What am I doing wrong?


<?xml version="1.0" encoding="UTF-8"?>
<xfa:datasets xmlns:xfa=" http://www.xfa.org/schema/xfa-data/1.0/"><xfa:data><form1><grantApplication><page1><Projec tTitle>Foo Bar</ProjectTitle><RequestNum>123456789</RequestNum><RequestTitle>MyTitle</RequestTitle>< PIName>My Principal</PIName><Degrees>Foo</Degrees><SSN>1234567</SSN><PositionTitle>Software Engineer</PositionTitle><Department>Computers</Department><Subdivision>Quality</Subdivisi on><Address>Bannerghatta Road</Address><City>Bangalore</City><State>Karnataka</State><ZipCode>560029</ZipCode><Ema il>myemail@mail.com</Email><PhoneNum>918051939616</PhoneNum><FaxNum>91803264522</FaxNum><H umanSubjects>1</HumanSubjects><CompNum>321</CompNum><VertebrateAnimals>2</VertebrateAnimal s><AssuranceNum>123</AssuranceNum><FromPeriod/><ThroughPeriod/><BudgetDirectCosts>200</Bud getDirectCosts><BudgetTotalCosts>300</BudgetTotalCosts><SupportDirectCosts>400</SupportDir ectCosts><SupportTotalCosts>500</SupportTotalCosts><OrgAddress>Downtown</OrgAddress><OrgCi ty>Newton</OrgCity><OrgState>WI</OrgState><OrgZipCode>34561</OrgZipCode><Type>2</Type><Org Code>290</OrgCode><IDNumber>98765</IDNumber><District>CapeTown</District><CurrentPage>1</C urrentPage><PageCount>2</PageCount></page1><page2><Description>This is the description of the project</Description><CurrentPage>2</CurrentPage><PageCount>2</PageCount></page2></grantA pplication></form1></xfa:data></xfa:datasets>

How do I have a tabnavigator page specific cfsavecontent?

forums_noreply@adobe.com — Mon, 07 Jul 2008 21:41:50 GMT

How do I write this so that a button on a tabnavigator page calls javascript function
that will pass the correct identifier for the page?

Any ideas?

<script language='JavaScript'>
<cfoutput>

function GotoPage(ID)
{
var sLocation;

sLocation = "gotoPage.cfm?ID=" + ID;
parent.location = sLocation;
}
</cfoutput>

</script>
</head>
<body >
<h1>Information</h1>
<cfoutput>
<cfform name='form_Info' format="flash" method="POST" width="90%" height="500" skin="haloBlue" action="NextPage.cfm">

<cfformgroup type="hbox" label="Client">
<cfformitem type="html">
<cfinput type="text" id="ClientName" name="ClientName" value="John Smith, Inc." size="60" label="Name: "/>
</cfformitem>

</cfformgroup>

<cfformgroup type="tabnavigator">
<cfformgroup type="page" label="John Smith">
<cfformitem type="html">
<cfinput type="text" id="EmployeeName" name="EmployeeName" value="John Smith" size="60" label="Name: "/>
</cfformitem>

<cfinvoke
component="PhoneNumbers"
method="List"
returnvariable="rsContactInfo"
>

<cfformgroup type="tabnavigator" id="tabContactInfo">
<cfloop query="rsContactInfo">
<cfformgroup type="page" label="#rsContactInfo.type#">
<cfformitem type="html">
<cfinput type="text" id="ContactInfoPhone_#rsContactInfo.id#" name="ContactInfoPhone_#rsContactInfo.id#" size="20" maxlength="14" mask="(999) 999-9999" validate="telephone" validateAt="onBlur,onSubmit" message="Error in Phone entry.\nFormat: (999)999-9999" value="#rsContactInfo.phone#" label="Phone: "/>
</cfformitem>


<cfsaveContent variable="gotoPagejs">

getURL("javascript:GotoPage(#rsContactInfo.id#);");
</cfsavecontent>
<cfinput name="Order" type="button" value="Create Book Order" onClick="#gotoPagejs#">
</cfformgroup>
</cfloop>
</cfformgroup>
</cfformgroup>
</cfformgroup>
<cfinput name="Save" type="submit" value="Save Changes">

</cfform>
</cfoutput>

</body>
</html>

Internet Explorer doesn't handle Flash Form on a single page

forums_noreply@adobe.com — Fri, 27 Jun 2008 20:45:15 GMT

On FireFox 2.0.0.12 (Linux), the attach code displays two accordions.
On Internet Explorer 7 (Windows XP), only one accordion is displayed.

First, How do I determine if this Internet Explorer or a Flash error?
Second, Is there a fix?




<cffunction access="private" name="WriteBookFlashSample" returntype="void">
<cfargument name="ProcessingName" required="true" type="String" >
<cfargument name="Catalog" required="true" type="String" >

<cfoutput>

<div style="background-color:##BDDFff">#ProcessingName# - 1</div>
<cfform format="flash" method="POST" skin="haloBlue" >
<cfformgroup type="accordion">

<cfformgroup type="page" label="#Catalog# - 'title'">
<cfformitem type="html">
Catalog Number: #Catalog#<br />
Title: title<br />
Queue: #ProcessingName#<br />
</cfformitem>
</cfformgroup>
</cfformgroup>
</cfform>
</cfoutput>
</cffunction>

<html>
<head>
<title >Sample</title>
</head>
<cfoutput>
<body >
<cfform id="Main" name="Main" action="Sample.cfm" method="POST">
<cfinvoke
method="WriteBookFlashSample"
ProcessingName="First"
Catalog="555-55555-5555">
<cfinvoke
method="WriteBookFlashSample"
ProcessingName="Second"
Catalog="777-7777-7777">
</cfform>
</body>
</cfoutput>
</html>

cfreport ("HTML format") missing columns for a query

forums_noreply@adobe.com — Thu, 12 Jun 2008 16:39:12 GMT

Using Linux Fedora, ColdFusion 8 Developer Edition.

Problem:

The command:
<cfreport
format="HTML"
template="ReportTemplateHtml.cfr"
filename="Report.html"
overwrite="yes"
query=#structReport.query#
>
With Format equal to PDF or RTF, which is correct output:
"item" "Description" "Qty" "Unit Price" "Extension"

The HTML output writes the following columns:
"item" "" "" "Unit Price" "Extension"
The "Description" and "Qty" are missing.

Any ideas as to why data is missing from HTML report?

The html output for the table is as follows:
<tr valign="top">
<td style="width: 18px; height: 18px;"></td>
<td colspan="3" style="background-color: #EDE9C6; border-top-style: solid; border-top-width: 1px; border-top-color: #000000; padding-top: 1px; border-left-style: solid; border-left-width: 1px; border-left-color: #000000; padding-left: 3px; border-bottom-style: solid; border-bottom-width: 1px; border-bottom-color: #000000; padding-bottom: 1px; border-right-style: solid; border-right-width: 1px; border-right-color: #000000; padding-right: 3px; "><span style="font-family: Helvetica; background-color: #EDE9C6; font-size: 10.0pt; font-weight: bold;">Item</span></td>
<td colspan="6" style="width: 273px; height: 18px;"></td>
<td colspan="3" style="background-color: #EDE9C6; border-top-style: solid; border-top-width: 1px; border-top-color: #000000; padding-top: 1px; border-left-style: solid; border-left-width: 1px; border-left-color: #000000; padding-left: 3px; border-bottom-style: solid; border-bottom-width: 1px; border-bottom-color: #000000; padding-bottom: 1px; border-right-style: solid; border-right-width: 1px; border-right-color: #000000; padding-right: 3px; "><span style="font-family: Helvetica; background-color: #EDE9C6; font-size: 10.0pt; font-weight: bold;">Unit Price</span></td>
<td colspan="3" style="background-color: #EDE9C6; border-top-style: solid; border-top-width: 1px; border-top-color: #000000; padding-top: 1px; border-left-style: solid; border-left-width: 1px; border-left-color: #000000; padding-left: 3px; border-bottom-style: solid; border-bottom-width: 1px; border-bottom-color: #000000; padding-bottom: 1px; border-right-style: solid; border-right-width: 1px; border-right-color: #000000; padding-right: 3px; "><span style="font-family: Helvetica; background-color: #EDE9C6; font-size: 10.0pt; font-weight: bold;">Extension</span></td>
<td style="width: 19px; height: 18px;"></td>
</tr>

Multiple cfformgroup Accordion don't display in IE 7Multiple cfformgroup Accordion don't display in IE 7

forums_noreply@adobe.com — Wed, 04 Jun 2008 16:42:45 GMT

Sorry for the double post, wasn't sure which category to post this question in.

On FireFox 2.0.0.12 (Linux), the attach code displays two accordions.
On Internet Explorer 7 (Windows XP), only one accordion is displayed.

First, How do I determine if this Internet Explorer or a Flash error?
Second, Is there a fix?




<cffunction access="private" name="WriteBookFlashSample" returntype="void">
<cfargument name="ProcessingName" required="true" type="String" >
<cfargument name="Catalog" required="true" type="String" >

<cfoutput>

<div style="background-color:##BDDFff">#ProcessingName# - 1</div>
<cfform format="flash" method="POST" skin="haloBlue" >
<cfformgroup type="accordion">

<cfformgroup type="page" label="#Catalog# - 'title'">
<cfformitem type="html">
Catalog Number: #Catalog#<br />
Title: title<br />
Queue: #ProcessingName#<br />
</cfformitem>
</cfformgroup>
</cfformgroup>
</cfform>
</cfoutput>
</cffunction>

<html>
<head>
<title >Sample</title>
</head>
<cfoutput>
<body >
<cfform id="Main" name="Main" action="Sample.cfm" method="POST">
<cfinvoke
method="WriteBookFlashSample"
ProcessingName="First"
Catalog="555-55555-5555">
<cfinvoke
method="WriteBookFlashSample"
ProcessingName="Second"
Catalog="777-7777-7777">
</cfform>
</body>
</cfoutput>
</html>

Multiple cfformgroup Accordion don't display in IE 7

forums_noreply@adobe.com — Wed, 04 Jun 2008 16:39:19 GMT

ColdFusion 8 - Client Variables don't work with PostgreSQL

forums_noreply@adobe.com — Wed, 23 Apr 2008 23:14:21 GMT

RedHat Fedora Linux
PostgreSQL version 8.2
ColdFusion version 8 Developer

Steps to create problem:
Creating Client Variables in the "ColdFusion Administrator".
checked "Create Client Variables" pressed "submit"

Results:
The "ColdFusion Administrator" errors out.

Problem:
"ColdFusion Administrator" calls a the page "postgresql.cfm", which creates the tables in the database.
Until "ColdFusion" executes the SQL "create table CGLOBAL (cfid char(64), data text, lvisit datetime)".

According to PostgreSQL website and documentation, the data type "datetime" doesn't exists."
Valid 'time/date data types' are timestamp,interval,date and time.

Question:
Is there some way of getting "ColdFusion" to "create a 'Client Variables' database" in PostgreSQL DBMS,
using "ColdFusion Administrator?
What are the SQL statements to "create a 'Client Variables' database" by hand?

ColdFusion, Linux, Apache and ELFCLASS32

forums_noreply@adobe.com — Fri, 04 Jan 2008 18:24:44 GMT

SUSE Linux 10
ColdFusion 8

I am getting the following error, when I try to start apatche2
"Starting httpd2 (prefork) httpd2-prefork: Syntax error on line 211 of /etc/apache2/httpd.comf: Cannot load /home/ColdFusion/runtime
/lib/wsconfig/1/mod_jrun22.so into server: /home/ColdFusion/runtime/lib/wsconfig/1/mod_jrun22.so: wrong ELF class: ELFCLASS32"

I have installed Sun Java 1.6.0

It should be a 32-bit version.

What is wrong?

Client Variables PostgreSQL

forums_noreply@adobe.com — Tue, 05 Feb 2008 20:51:01 GMT

Problem: No Client Variables

System:
Adobe ColdFusion 8.0 Developer's Edition 32-bit
Kernel 2.6.23
Fedora 8
PostgreSQL 8.2.6

Steps to create problem:
1) Create a database - empty no tables
2) Added the database to the list of Data Sources, using the correct driver
PostgreSQL.
3) Went to "Client Variables"
4) Added database to the list.
Checked "Create Client Database Tables"
Checked "Purge data for Client that unvisited for 90 days
Checked/unchecked "Disable"

Results:
Flails to create database tables.
However, ColdFusion created a table "cdata".

I can't create a sessession for website, because of missing table "cglobal".

What I am I doing wrong?

Trying to evaluate ColdFusion 8 under Apache

forums_noreply@adobe.com — Tue, 08 Jan 2008 18:01:48 GMT

SUSE Linux 10
ColdFusion 8 - Developer Edition
Sun Java 1.6.0 32-bit version
ColdFusion configured Apache.

Error Message:
I am getting the following error, when I try to start apatche2
"Starting httpd2 (prefork) httpd2-prefork: Syntax error on line 211 of /etc/apache2/httpd.comf: Cannot load /home/ColdFusion/runtime
/lib/wsconfig/1/mod_jrun22.so into server: /home/ColdFusion/runtime/lib/wsconfig/1/mod_jrun22.so: wrong ELF class: ELFCLASS32"

Start ColdFusion from the command line, which worked.

I tried the following:
1) accessing ColdFusion via port outlined "Web Application Contruction Kit", but no access.
via IP address: localhost and 127.0.0.1
Ports: 8500 and 8500.
2) looked through the logs, but apache gives the error message above, and ColdFusion says
everything is alright.
3) Disabled the FireWall

I have looked through the forums and FAQ for both Apache and Adobe ColdFusion, and verified
I was running 32-bit Java, which I am.

Questions:
1) Is the problem Apache or ColdFusion?
2) How do I resolve this problem?

Brian

ColdFusion, Linux, Apache and ELFCLASS32

forums_noreply@adobe.com — Fri, 04 Jan 2008 18:21:50 GMT