Adobe Community : All Content - All Communities

1and1 domain with BusinessCatalyst

forums_noreply@adobe.com — Wed, 23 Apr 2014 21:18:11 GMT

Hi,

I'm following the instructions provided here and here but alas it does not seem to be working.

I wish to have http://ladispersiondufils.net/ and http://www.ladispersiondufils.net/ redirected to my site at http://lddf.businesscatalyst.com/

but currently neither work at all.

In BC, I have:

At 1and1.com I have:

and I also have the 1and1 re-directing my domain to BC. Should I?

I must be missing something very simple. Any tips appreciated.

Fullscreen widgets within accordion or tabbed panel?

forums_noreply@adobe.com — Tue, 22 Apr 2014 02:30:11 GMT

Hi,

I can place a slideshow within an accorddion or tabbed panel,

but I seem unable to make it fullscreen (the option is greyed-out).

Am I doing something wrong, or is this a limitation of Muse?

Thanks,

Illustrator to Word to PDF

forums_noreply@adobe.com — Wed, 23 Oct 2013 14:51:20 GMT

Hi Everyone,

I need help publishing a PDF from a Word document full of diagrams created with Adobe Illustrator CS6. My diagrams are all vector. I am free to export them anyway I like. My Word doc has many cross-references, footnotes and Endnote references and a large table of contents. It is a few hundred pages long, with around 50 diagrams. I would like to preserve the original quality of the vector art and the intra-document clickable links.

Each step in the process has multiple possible paths, and each path often many options. There are 3 steps:

1) Export from Illustrator to: .ai, .pdf, .eps, .wmf, .emf

optional 1b) Convert (eg. use Acrobat to convert .ai to .doc, .eps or .ps)

2) Import to Word: drap and drop, file cut and paste, insert picture, insert object, insert object linked to file, PDF Reflow (Word 2013). I tried them all.

3) Publish to PDF from Word. Many different paths...

- Print to PDF: I have AdobePDF, PDFCreator, NovaPDF printers installed

- Save as... : Save as->AdobePDF or Save as->PDF or XPS

- Plugin toolbars: Acrobat->CreatePDF, NovaPDF->Save as PDF, PDF Architect->Convert

- Save as .doc and convert with Adobe Acrobat.

I have tried many different permutations. There are 4 possible errors:

E1 - The diagrams are converted into bitmaps.

E2 - The diagrams are 'linearised' - curves are converted into chains of linear sections

E3 - The diagrams are corrupted - text missing, characters changed, dotted lines become solid lines etc.

E4 - Hyperlinks are lost.

Here are some results of my tests.

I see no difference so far between Word 2007 and Word 2013. Results below stand for both.
There is no difference between Word->Acrobat->CreatePDF and Acrobat->Convert Word to PDF.
Illustrator -> AI -> Acrobat -> Word almost works, but diagrams are corrupted in various ways (eg. dashed lines become solid).
When export from Illustrator as EPS level 2, EPS level 3, EMF, WMF and PDF and get different results depending on the path to PDF:

No links preserved:

Word->Print to AdobePDF: Good: eps2, eps3, emf Bad: PDF (E1), wmf (E2)

Word->Print to PDFArchitect: Good: eps2, eps3, emf Bad: PDF (E1), wmf (E2)

Word->Print to PDFCreator: Good: eps2, eps3, emf Bad: PDF (E1), wmf (E2)

Word->Print to NovaPDF: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF (E1), wmf (E2)

Word->Toolbar->PDFArchitect: Simply prints with current postscript printer. One of above.

Links preserved:

Word->Save as AdobePDF: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF (E1), wmf (E2)

Word->Save as PDForXPS: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E1), PDF (E1), wmf (E2)

Word->Toolbar->Acrobat: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF (E1), wmf (E2)

Word->Toolbar->NovaPDF: Good: - Bad: eps2 (E2), eps3 (E2/E3), emf (E3), PDF(E1)

So, only the "Word->Print to PDF" pathways provide good quality vector diagrams, but none of these preserve intra-document links.

Please, anyone have a solution for this?

Kind Regards,

ps. I have:

- Adobe Creative Cloud CS6 (Illustrator, Acrobat etc. all latest versions)

- Word 2007 (latest version (SP3 12.0.6683.5002))

- Word 2013 (Office 365 latest version)

- Access to a Mac with Word 2011.

- and I am happy to install any software that may help me achieve my goal.

Red Rocket not used by AME

forums_noreply@adobe.com — Tue, 19 Mar 2013 18:39:13 GMT

Hi,

I am currently unable to get my Red Rocket working in AME.

I'm doing a RED R3D to Jpeg2000 transcode, and in Premiere I get around 2.3 frames/second, with all cores running around 50%.

In AME, all cores are maxed at 100%, but I only get around 1 frame/second. I conclude from this that my Rocket is not running in AME.

I'm using the fnordware j2k jpeg200 compressor.

I've made sure that neither Premiere nor RedCineX have control of my card - I launch AME stand alone.

I've checked the "source settings" of my clip have "Use all available" for the Rocket.

Have reinstalled the most recent ImporterRED.prm and ImporterREDserver.exe files.

I have Windows 7 64bit, AME CS6 6.0.3.1, latest Red drivers etc.

Not sure what to check next. REALLY need to get this working, as I have 21 hours of footage separated into 300-400 files to get through over the next few days. I need AME accelerated.

ANY ideas appreciated.

Matt

MPEG2 encoder without limits on resolution?

forums_noreply@adobe.com — Mon, 10 Jan 2011 14:17:06 GMT

Hello,

I'm looking for an mpeg2 encoder for Premiere Pro that is no restricted in output resolution.

The MainConcept one here limits the output resolution to 1920x1080

Does anyone know of perhaps another 3rd party encoder that isn't limited to this?

Matt

ps. a) Yes. it must be mpeg2 and b) yes it is possible to create arbitrarily sized mpeg2 movies - I do this often with mpeg2enc and ffmpeg.