More hardware information needed... ESPECIALLY the brand/model graphics adapter in that laptop, and the driver version
Also, some laptop information...
For effective HD video editing, a laptop with the following
-at least the Intel sandy bridge 2720 or 2820 quad processor
-1280x900 display with OpenGL 2.0-compatible graphics card
-and 8 or 16 gig ram and Win7 64bit Pro
-and 2 internal 7200 HDDs minimum
Does your graphics adapter "card or motherboard chip" and display match what I bolded?
Dual laptop video http://forums.adobe.com/thread/1001579
I'm getting the same error message.
I have Windows 7 Professional [I can't find the version number, for some reason]
Intel Core i7-2630QM CPU @ 2.00GHz
8.00 GB RAM
1920x1080 Graphics Display Mode
I have Intel HD Graphics 3000
Driver Version: 18.104.22.1682
Physical Memory: 8139 MB
Graphics Processor: Intel64 Family 6 Model 42 Stepping 7
Processor Speed: 1995 MHz
Video BIOS: 2104.0
OK, with the Intel graphics chip, it might be tough to get a newer driver, but I would check the Intel Web site, or if you have a Dell, HP, etc., check their Web stie, as many computer mfgrs. re-write drivers for their machines. Do not trust Windows, or any utility, to tell you if you have the latest driver.
I woud be thinking about perhaps adding an nVidia card, with full CUDA support.
That is usually impossible in a laptop.
You are correct. I had not visited the OP in too long, and had forgotten about the Toshiba.
The combo of an embedded Intel graphics processor and Toshiba sort of sums it up - not much luck.
Toshiba has historically re-written and re-packaged their graphics drivers, even with nVidia chips, and seldom release more than the initial one. I had to use a Web-based service to re-warp my nVidia drivers for an earlier Toshiba. I retired it over five years ago, after about 3 years of service, and because of another thread on Toshibas, checked their site - after 8 years, they still had not released a new driver. Couple that with Intel, and I doubt that the OP will find resolution.
Sorry about my mistake there - need to go back and read full threads. My bad.