I want to load a series .jpgs into an existing mcs. The mcs are 75 x 75 pix and the .jpgs are 50 x 50 pix. The problem is that I made the mcs with the registration point at the top left corner. This causes the mcs to load in at that point so that the margine between the .jpg and the mc is uneven. How can I change the registration point of each mc so that the CENTER of the .jpg is positioned the CENTER of the mc?
that doesn't make sense.
if you load into a movieclip, all graphics in that movieclip are replaced by the loaded image.
if you want to make it appear that a loaded image is in a picture frame you would create a frame movieclip and create a child movieclip of that frame that would be the load-target. you could then center the loaded image (after loading is complete if you don't know the loaded image's size).
Yes, you're correct. I had a duplicate set of mcs directly under the "real" mcs. When the real ones were replaced, that left the duplicate set visible so it appeared as if they were the ones with the mcs loaded into them. I should have known. What a dummy!