32 Replies Latest reply on Oct 1, 2011 11:21 AM by rowby

    Windows 7 System only recognizing 16GB out of 24GB newly installed

    rowby Level 1

      Hi

       

      Just installed 24GB of memory on my Windows 7, P6X58D PREMIUM motherboard. 

       

      I found a utility, CPU-Z, that examines my system.  CPU-Z shows the 24GB but Windows 7 says only 16 GB is "Installed".

       

      Using Corsair Vengeance DDR3 (6 x4GB)

       

      I see this issue doing a Google search, that is, Windows only regognizing 16GB in some instances.

       

      Wondering if any of you have come across this and have any suggestions.

       

      Attached is the readout (very long!) of the CPU-Z report.

       

      Below is a snippet from that report:

       

       

      Northbridge            Intel X58 rev. 13

      Southbridge            Intel 82801JR (ICH10R) rev. 00

      Graphic Interface        PCI-Express

      PCI-E Link Width        x16

      PCI-E Max Link Width        x16

      Memory Type            DDR3

      Memory Size            24576 MBytes

      Channels            Dual

      Memory Frequency        534.6 MHz (2:8)

      CAS# latency (CL)        8.0

      RAS# to CAS# delay (tRCD)    8

      RAS# Precharge (tRP)        8

      Cycle Time (tRAS)        20

      Row Refresh Cycle Time (tRFC)    86

      Command Rate (CR)        2T

      Uncore Frequency        2673.0 MHz

       

      Thanks


      Rowby