I am trying to dub audio commentary into my clips using the SoundMAX program settings provided with the ASUS ADI AD2000B Audio Codec. I have confirmed a microphone signal appears in SoundMAX and that PPro Audio Hardware Settings/Enable Devices has a check mark against 'Microphone(SoundMAX Integrated'. The other unchecked device shown is 'Line In (SoundMAX Intergrated Di'. When I set up the Audio Mixer with a mono Audio 4 channel, click the Audio 4 microphone icon to turn it on, turn off all other audio channels, click the record button, then speak into the microphone, no signal appears. Unfortunately, I have not been able to confirm that I am providing ASIO audio to PPro. I need to know if I am wasting my time trying to dub audio with the present setup or I am missing something. If no ASIO is possible using the present setup, what audio card do you recommend?
When you have your Mic input enabled in ASIO hardware setup, then in the audio mixer ou need to arm tracks with mic inputs then, then press the record button the input should be seen at this point. But to record you voice over onto time line you need to play the timeline. So that the targeted Audio Track will be recorded onto timeline. And after you stop playback you will se recorded audio.
reed some info here http://forums.adobe.com/message/2945122
What you recommend I believe I have already tried. Note that I am detecting a signal into SoundMAX, confirming that SoundMAX is recognized by PPro, but I am not detecting a signal into the established mono audio channel that is set up as you recommend. My problem is confirming that the sound system and software provided with the ASUS motherboard is providing an ASIO hardware setup. You have confirmed that I am at least heading in the right direction after reading the help information and assuming I have not missed something. If the hardware setup provided by ASUS is not ASIO, I am wasting my time trying any further.