Content in Adobe Community

Using chapter points in menus

forums_noreply@adobe.com — Thu, 13 Nov 2014 16:09:57 GMT

If you have 5 different areas you want to use in a menu, can you put a chapter point as a start? I think the anser is yes, but since it's just a chapter point, how do you get "play" to stop at the next chapter point and not just roll on playing the rest of the DVD?

Can someone help me with Encore

forums_noreply@adobe.com — Thu, 13 Nov 2014 15:02:52 GMT

My encore program keeps saying general error, I need to burn a dvd for a client, asap. What am I doing wrong?

Blu-Ray Rendering and Authoriing

forums_noreply@adobe.com — Thu, 13 Nov 2014 12:38:57 GMT

I've had AE CS4 for a few years and have been able to do just about anything and everything I needed to create video clips and compositions for things like wedding films and vacation videos. I have a blu-ray burner in my PC and wanted to actually do a test to see what kind of quality I can get from my camera, since it records 1920x1080 AVCHD at 60fps. I created a short 3 minute HD composition and tried rendering it a few different ways, none of which have been great. A Quicktime MOV was 62GB for a 3 minute clip; YIKES!! I tried the h264 Blu Ray setting and it ends up creating a m4v and wav file??? It separates the sound into a WAV and the video is an m4v, whatever that is. Then I tried a standard h.264 and it creates an MP4, but still without sound. A straight AVI was far too large! The only thing I've found that is small enough in file size and includes sound is an FLV file. I'm starting to think it's not worth the effort to make HD blu rays.

The bigger issue for me is finding something to author the blu-ray with. I have Sony DVD Architect, which is fantastic for DVDs. I guess it's supposed to support BDs as well. I see Adobe is dropping Encore. So this leads me to the most important question, if I wanted to burn a blu-ray with a menu system what the heck are you supposed to use??

Thanks if you read this far!

How do i access Encore with CC (2014)?

forums_noreply@adobe.com — Thu, 13 Nov 2014 12:31:25 GMT

Where adobe used to give me the option on whether i wanted CS6 or CC, now i can only get CC (2014) and i cant figure out how to open encore.

Thanks.

Hey guys, i am missing my buttons on encore

forums_noreply@adobe.com — Wed, 12 Nov 2014 17:36:08 GMT

Hey guys, i am missing my buttons on encore

What to do about quality????

forums_noreply@adobe.com — Wed, 12 Nov 2014 05:41:01 GMT

I shot some video with my Canon G20 in full HD and made a video with adobe premiere pro and encore. The problem is, When I play it on the tv, it is terrible quality. Will someone please help me to figure out how to make the quality of this video the best possible. I rendered the entire project in premiere pro before dynamic linking the video to encore. I am a beginner at editing videos so please try to tell me the best step by step way to make this video crystal clear on my TV. Thanks so much. Matt

Please help, I cannot get play menu to work after using dynamic link.

forums_noreply@adobe.com — Wed, 12 Nov 2014 05:38:43 GMT

Ok. So I sent a video from premiere pro to encore using dynamic link. Then I created a menu in encore and dragged video to play button I created for the dvd. However, when I burn the dvd, the menu is not a part of the DVD. I do not know why this happens when I use a dynamic linked video. It does not happen when I use other videos. Please help. Thanks Matt

PGC has an error at 00;00;00;00. Internal software error: %0, line intro - PGC Info: name = intro, ref = Bpgc, time = 00:00:00:00

forums_noreply@adobe.com — Wed, 12 Nov 2014 04:32:22 GMT

i keep getting this error when trying to build a dvd from Encore CS6. I have tried everything and it still doesnt work, so i am taking all suggestions. Its a wedding video and the menu has music and pictures. I exported from premiere pro CC into a m2v and ac3

Please help.

Is adobe encore dvd2.0 available?

forums_noreply@adobe.com — Wed, 12 Nov 2014 02:45:08 GMT

I tried the download link given to me using adobe chat, but encore dvd2.0 is nowhere to be found. Is it still possible to get it?

error sense code 62900 - CANT BURN, HELP!

forums_noreply@adobe.com — Tue, 11 Nov 2014 20:02:22 GMT

hi, im trying to build a dvd9 with encore and i cant burn it because i get this error.
What is going on?

encore 5.5 error and offline

forums_noreply@adobe.com — Tue, 11 Nov 2014 20:01:39 GMT

I get a general error when I hit preview in encore 5.5 why?

I am also offline when I am on resource Central. How do I get on line?

The Disc info says it is full with a blank DVD or without a DVD in, why?

Combined Video / DVD-ROM only works with output directly to Disc

forums_noreply@adobe.com — Tue, 11 Nov 2014 18:40:20 GMT

Hi all,

I produced a combined Video / DVD-ROM and have severall issues with output:

1. When I write the project directly on a DVD, all is ok

But in my current project, I wanted to write the project on a folder on the harddrive (just to send a master copy online)....

2. When I write the project in a folder on the harddrive, the video_ts is ok, but the data (html with 8 linked videos) won't play correct: On the starting page, there is a video-slider with preview-pictures, that are linked to the videos. The slider doesn't show the preview-pictures...

Question: What did Encore to my data? I thought, Encore only copys the files. But oviously, Encore handeled the data by writing to the harddrive in another way, than by writing to the DVD. Has anyone experience with this situation?

3. Another problem: When I replace the incorrect data section on the harddrive folder with the correct data section from the correct DVD-ROM Output, anything is ok - when I open the files in the harddrive folder. But when I burn a DVD with this mix, my DVD-Player can't read this DVD. I compared this DVD with the correct DVD and recognized no difference. In particular, there is a correct video_ts folder on both DVDs

Again the question is: what does Encore with the data? Respectively, what makes a DVD readable / not readable by DVD-Players.

Has anyone an idea, what is going wrong here?

Best regards

Markus

Dimensions for DVD burn

forums_noreply@adobe.com — Sun, 09 Nov 2014 20:33:02 GMT

When I import an asset the dimensions of the asset are not used. I see that they are supposed to be automatically used, but its not working. I just need to set a DVD at 1280x1080. How do I do that?

Why did Adobe abandon Encore?!?

forums_noreply@adobe.com — Sat, 08 Nov 2014 22:42:20 GMT

Here I am, happy as a clam, enjoying all the great new stuff with CC 2014, and then I get a job to make DVDs for a training video project -- and Encore is missing??

Ok, so I got Encore CS6 no problem -- but now I can't round-trip?? Seriously, Adobe? Why? Glad I took extra time to make sure I had all of my applications to complete this job, otherwise I'd be in serious trouble. I may have lost the contract.

Lack of roundtrip wasn't a deal breaker, but it seriously sucks when I estimated the entire job around workflows that I've been using for years.

Thing is, you don't provide a software tool faithfully for YEARS, and then pull something underhanded like this. No fall-back. No warning. Once Encore is gone, what then? I've used Scenerist, DVD Lab and Sony DVD authoring programs -- they're AWFUL. Apple's DVD Studio Pro was old but it kicked ***. Now we can't even download THAT. iDVD same thing. It feels like we're getting our hands cut off.

I need authoring that allows me to build menus and structures from scratch, not just templates -- these projects can't be satisfied with 'pop-n-play'.

I can't link up the play button in Encore

forums_noreply@adobe.com — Sat, 08 Nov 2014 21:30:51 GMT

I just want one button, THE PLAY Button.

The project has no errors and will allow a build.

Then When I add a button It will not link.

Burn a 150 minutes Full HD into a dvd

forums_noreply@adobe.com — Sat, 08 Nov 2014 20:50:29 GMT

Hello, I have a 150 minutes full hd video clip. is it possible to burn whole clip into one dvd ? if YES, is it clear ? if No, should i split into 2 DVDs ? and what is the best bitrate (VBR 2 pass) for 90 or 150 minutes video ? does it have forumla or something ?

Why is Encore not being updated to CC?

forums_noreply@adobe.com — Sat, 08 Nov 2014 17:52:28 GMT

I've used Adobe for 2 years now and love what Encore allows me to do in DVD authoring. With the new CC suite, I'm not sure I understand why this product is being "dropped". I know that those that don't have it can install it, however I'm not sure why Adobe dropped it as in the Mac world I don't know of a DVD authoring software package that does what Encore does.

One of the things I was hoping they would fix was the output for DVD images does not change from project to project. If I have Project 1 and I have it create a DVD image and give it a folder and file name of Project1.iso and then open another project, Project 2, it does not chnage the ISO name saved when I closed Project 2. It still says Project 1 (and if the folder path is long, you can't even see the iso name unless you click in the field and scroll all the way to the right).

Is everyone still using Encore or is there yet another option out there that gives as much flexability in creating paths and navigation the way that Encore does?

How to correctly identify and measure menu sizes

forums_noreply@adobe.com — Fri, 07 Nov 2014 21:11:10 GMT

I've got a project that upon build says it's utilizing less than 4.7G. For that reason I began a build and after hours of processing it said there wasn't enough space even though Encore showed only 4.011G was used and over 600M was still available before the build. Seems like it shouldn't build if it's not going to work out.

Everything has been transcoded or is already converted to MPEG-2. However I've read just about every thread I can find on the subject of dealing with the 1G menu size limit and now a new anomaly, the Times and/or chapters adjusted warning, has appeared. I'm trying to understand how anyone can logically tie these back to something specific to troubleshoot and correct them. Just about every other error links back to the problem so you can adjust it, but these are vacuous.

My first question then is about menus and how a menu actually measured. What determines total file size, the menu itself or the content that is linked from the menu? Why not have a list of total menu sizes so you can see not only the individual file sizes, but the aggregates that impact the menu size limitation?

All my menus are static and link to video clips. My largest clip is about 511M of video and 265M of audio. That one is already converted to MPEG-2. I have less than 4.7G of content to burn to the DVD and appear to have plenty of headroom according to the build menu disk info.

My next question is about a file that Encore says is in use, but it isn't. It could be adding to my overall menu size, yet nothing is linked to it and no chapters appear to be in use with it. It should be an orphan, but not according to Encore. Again, shouldn't there be a logical way to identify that link? Managing a dependency that can't be found is a nightmare. None of the menus or timelines offer any insight about the mystery clip that can't be deleted. I read a thread that said they had a similar problem, but building forced the anomaly out. Didn't work for me.

Then lastly, the time and/or chapter adjusted problem has no suggested corrective action. It wasn't there before the build so why is it there now? Is it due to transcoding? I don't see any obvious changes to the timeline so where is the problem and how does is someone expected to troubleshoot it?

Shouldn't there be a glossary of error codes somewhere with at least some basic explanation?

Seems like a very clunky application, but when integrated with the rest of the Adobe Suite very powerful...if I can ever get a build to complete.

Any suggestions?

Message was edited by: Kevin Nay

So as not to waste anyone's time I'm assuming the transcoding adjusted the timeline/chapters and I was able to solve one problem by adding back in an ending chapter point. Remaining issue is the menu size however.

set poster image problem

forums_noreply@adobe.com — Fri, 07 Nov 2014 21:09:41 GMT

I am having trouble with the set poster images not showing up in my custom menus. I have my menu buttons linked to chapters (that work as links in the preview) but no matter what I try I can not get the set poster image to appear in my menu button. Instead my buttons appear blank. Is this an issue any one else has had?

Quality Loss when Burning to DVD

forums_noreply@adobe.com — Fri, 07 Nov 2014 17:16:23 GMT

Hello,

I have a DVD that we sell that has about 80 to 90 minutes of footage on it each week. We can barely fit it on a DVD and when we do it gets pixellated and the quality looks bad. Can someone please give me some advice on how to limit this problem? I see full Hollywood movies fit on 1 DVD all the time, am I doing something wrong?

Thanks!

Andy

Encore won't import markers with bluray vid output from Premiere through Media Encoder

forums_noreply@adobe.com — Fri, 07 Nov 2014 01:48:43 GMT

I have a sizeable video project, just completed, that needs to be output to DVD and BluRay. DVDs are done, no problem - the three timelines are each exported from Premiere by queueing them in Media Encoder. Side-car .xmp files are produced containing the chapter markers, and it all imports into Encore without issue, chapter markers are there, DVD burns successfully, works on DVD players, all good.

Now for the Blurays.... Same process as before, queueing the same timelines in Media Encoder, this time exporting using the H264 BluRay HD1080i 25 preset, the export works fine, no issues or error messages, but mporting into into Encore (using Import as Asset, Import as Timeline, etc), I get the error:

"Error parsing MPEG metadata file. Deleting or renaming "E:\YourVid\test.m4v.xmpses" will allow you to import, but any markers will be lost."

In other words, the markers file is either failing to export crrectly from Media Encoder, or failing to import correctly into Encore, or both.

I have never had this problem before, but this is the first exporting I have done with the latest versions of Premiere and Media Encoder, ie versions:

Premiere CC: 2014.1 8.1.0 (81) Build

Media Encoder CC: 2014.1 Build 8.1.0.122

Encore CS6: Version 6.0.2.004

... on Win 7 Pro 64bit

Can anyone help? Are other people having this problem? Is this a bug with the latest version of Media Encoder and/or Premiere, or is it just co-incidence and something else is the problem? And most importantly, is there a sensible workaround (ie other than just re-making all the chapter markers in Encore?) Can I export the chapter markers from Premiere into Encore some other way?

Please help!!!

Menu Blue Ray maked in encore with crashes

forums_noreply@adobe.com — Thu, 06 Nov 2014 20:35:25 GMT

Hello, I have a problem and no solution can somehow, I wonder if you guys can help me.
I did a project on Blue Ray in Encore, when I see in this preview is perfect, I burn an iso orrecord it on Blue Ray and when I watch it crashes a few seconds including the musicexactly the time the buttons will appear, the menu is animated and buttons appear in 32seconds of animation. I'm using the CS5 version and I can not a solution to this problem.Please help me

thank you

Priscilla

timeline

forums_noreply@adobe.com — Thu, 06 Nov 2014 20:20:47 GMT

Hello I don't see any tracks in my timeline and cant drag and drop

Burn a Blu-Ray disk

forums_noreply@adobe.com — Thu, 06 Nov 2014 17:26:16 GMT

Can I Burn a Blu Ray disk with Encore CS4 and Windows 8.1? I get the message DPC_watchdog_violation!

Thanks for your answer.

Regards.

JCE

On mac : In " Encore" I can not install menu buttons , yet I installed menus without problem .... help! thank you

forums_noreply@adobe.com — Thu, 06 Nov 2014 15:32:34 GMT

On mac : In " Encore" I can not install menu buttons , yet I installed menus without problem .... help! thank you

Encore 6 disappeared - Now can't reinstall

forums_noreply@adobe.com — Thu, 06 Nov 2014 15:31:23 GMT

I had Encore 6 installed from CC and have been using it for several weeks. I went to use it this morning (after not using it for about a week) and it's gone. I still have my save files, but Encore seemed to uninstall itself. I went to try and install Encore again from the CC app, but I can't seem to find the older version option anymore. Was this feature taken away?

Please assist!

Thanks!

"The player used to create the project could not be found"

forums_noreply@adobe.com — Thu, 06 Nov 2014 03:29:33 GMT

After installing Adobe Premiere Pro CC 2014, I have had issues with Encore, which worked fine before. This is the message I get when starting Encore:

"The player used to create the project could not be found, Adobe defaulting to Adobe player".

Once I attempt to open a saved project, the message is "Adobe Encore could not find any capable video play modules. Please update your video display drive and start again". I can't create a new project because the program crashes in the attempt.

I have uninstalled and reinstalled Encore. All drivers are up to date. I am running the program as an administrator.

Sony Vaio E Series

Windows 8

Any ideas what to do?

Adobe Encore crashes after creating New Project

forums_noreply@adobe.com — Wed, 05 Nov 2014 23:09:18 GMT

So something weird and unexpected happened so I'm telling the whole thing. I uninstalled Premiere Pro CC and installed Premiere Pro CS6 and the uninstalled it but unchecked Encore so that I can use Encore. I never used it before. So when I open Encore and create a New Project, it immediately crashes every time! Did anybody else encounter this problem? Please help!

Encore CS6 On OSX Mavericks

forums_noreply@adobe.com — Wed, 05 Nov 2014 21:49:30 GMT

Mac and Encore CS6 user here. I've been using the last dying version of Encore () on OSX 10.8.5 with no major issues for several months now (yes I know it's technically not supported beyond 10.7.x).

I'm just curious if anyone has tried it on the new Mavericks update yet and if so please post your results here. I may test it myself in the coming weeks and if I do I'll provide an update.

Thanks.

WinFile.cpp-814

forums_noreply@adobe.com — Tue, 04 Nov 2014 18:27:41 GMT

hello

i have problem with WinFile.cpp-814. what is this?

PremiaCCで書き出したデータがEncoreCS6で使えない。

forums_noreply@adobe.com — Tue, 04 Nov 2014 18:25:45 GMT

Windows8.1を使用。

PremiaCC2014からMedia encorderCC2014を使って書き出したデータがEncoreCS6で使えない。

試しに同じ画像をPremiaCS6で書き出したらEncoreCS6で使えた。

PremiaCCにしたら不便になった。改善されない場合、PremiaCS6を使うので、ＣＣは解約したい。

Button problems with Encore

forums_noreply@adobe.com — Tue, 04 Nov 2014 17:53:52 GMT

Hi,

So I'm having some problems with creating custom Menu buttons in Encore (CS5). There are two problems I'm having. The first is that although I believe I've created the buttons correctly in PS, when the file is imported into Encore it doesn't seem to recognise the highlight as a separate layer. I.e, I have a layer group called "(+) Play", within it the text layer "Play All" and the highlight layer "(=1) Highlight", but in Encore the text and highlight button are being treated as the same thing, with the highlight layer (in this case a circle) always visible, regardless of whether Encore is set to be in standard state or otherwise. What am I doing wrong here? I've watched so many tutorial videos on this and I can't see I'm doing anything different.

As for the second problem, after being frustrated to the point of feeling like I am actually insane, I decided to just use a button preset from the library and add it to my custom menu background, thinking I could just modify the button as I wanted to. Problem is, as soon as I drag the button from the library into the monitor window Encore crashes. Every time. Doesn't matter what button it is. It also crashes when I try to add a button to a preset menu template.

If anyone can enlighten me here I'd be very grateful.

Yours sincerely,

Lobotomised.

i am getting a licesing error 150:30 CS4 Encor on my mac pro. what is the work flow to fix this

forums_noreply@adobe.com — Mon, 03 Nov 2014 23:58:45 GMT

I bought CS4 Encor from Adobe. CS4 Encor has been removed from my account. Encor no longer works. i get a 150:30 licensing error. I use a up to date Mac Book Pr .How do i fix the error and restore my Adobe account.

when playing a timeline, a frame of the previous timeline flashing in the begining of it

forums_noreply@adobe.com — Sun, 02 Nov 2014 17:35:00 GMT

Its a swf presentation build with Encore CS5

MAC OS Yosemite compatibility

forums_noreply@adobe.com — Sun, 02 Nov 2014 17:16:07 GMT

Hi all...

Just ust wondered if anyone knows if Adobe Encore CS6 is still fully compatible with MAC OS Yosemite. has anyone encountered issues with importing subtitles or anything like that? I know with my previous version of Encore CS5 when I updated to OS Mavericks, I lost the ability to subtitle.

Many thanks

DirectLink from Premiere Freezes when searching for sequences

forums_noreply@adobe.com — Sun, 02 Nov 2014 17:06:21 GMT

Hello,

I'm trying to DirectLink a Premiere Pro CC 2014.1 file into Encore and it freezes in the dialogue box where it's looking for the sequences in the Premiere file. Like this:

I've waited more than 5 minutes for it to load. (I have a 2.3GHz quad core, i7 with 8g of ram) There's only one sequence to this file and it's only about 4 minutes. I've also tried other Premiere projects and they get stuck as well.

Any help would be greatly appreciated. I'm using a MacBook Pro OS 10.9.5, Encore CS 6.0.1.013 and PP 2014.1 build 8.1.0 (81)

Thanks!

Will Mendez

How well does Encore CS6 transcode?

forums_noreply@adobe.com — Sun, 02 Nov 2014 00:23:07 GMT

I've always exported my timeline with encore chapter markers in either DVD or Blu-ray format, and then imported that file into encore, instead of having encore do the transcode. I find now that encore CS6 does not bring in my chapter markers, so I need to use dynamic link and transcode in encore. I've selected presets that are the same as those I used when I exported from premiere. Any opinions as to whether the quality of the encore transcode will equal that of my export from the premier pro timeline? If not, I'll just have to add my chapter markers in encore. Thanks.

can I burn a 720x1280 video on a dual dvd? It's a HD video

forums_noreply@adobe.com — Sat, 01 Nov 2014 20:33:59 GMT

can I burn a 720x1280 video on a dual dvd? It's a HD video

When popup windows open in Encore I am unable to select within that window

forums_noreply@adobe.com — Sat, 01 Nov 2014 20:29:38 GMT

Encore 5.5, for instance. . . .I got to file, dynamic link, import sequence and a pop up window comes up. I am unable to select anything within that popup window to tell encore where to find the files I need. This is the case with ANY popup window when working within encore.

HELP!!

What The Heck Is 'Parsing'? And Why Won't Encore Import This Bluray File?

forums_noreply@adobe.com — Sat, 01 Nov 2014 04:25:47 GMT

I am exporting h264 Bluray from the Premiere timeline like I always have, but now suddenly this is happening. I have no idea what 'parsing' is or why I am not able to import this file into Encore

How do I auto-highlight a button when a menu is accessed?

forums_noreply@adobe.com — Fri, 31 Oct 2014 20:22:56 GMT

Hello everyone,

I have searched a lot, but can't figure out how can I set which button should be highlighted (not to be mistaken with auto-activate) when a menu is opened?

Encore always highlights a button of its choice and I can't control that. I am sure its a simple thing, but would really appreciate your help.

Encore 6 BluRay DVD burn failure

forums_noreply@adobe.com — Fri, 31 Oct 2014 16:53:42 GMT

I am trying to burn a BluRay disc from Encore 6. The Encore BluRay file checks out in the build part of the program. When I click the build button to burn it to the DVD, I get the following message BluRay Error; "device error", Code "3" Note Create STC Sequence: Fail to write M25 file. What does this mean and how can I get my BR DVD to burn. The project was created in Prem Pro CC, exported the media as a H264 BluRay file, then imported into Encore 6 Any suggestions thanks !

"Build" option is greyed out.

forums_noreply@adobe.com — Fri, 31 Oct 2014 15:39:25 GMT

Hello. I am working on a Mac Book Pro with a Superdrive USB DVD drive. Using Adobe Encore CS6 with Creative Cloud. Exported .m2v and .wav files from premiere and imported them into Encore. Have set up the first play function. A new DVD is in the drive but the "Build" option is greyed out. Any ideas out there?

How can I create seamless intro and outros in Encore DVD menus?

forums_noreply@adobe.com — Fri, 31 Oct 2014 01:47:45 GMT

Hello. I am using Encore CS6, and would like to have an intro animation seamlessly transition into the main menu which loops if no selection is made. After a selection is made I would like my outro animation to play before playing my feature timeline. I would like to know how to do this without any black frames popping up during these transitions.

I have been doing much research on this, and it seems that I should create an animation with the intro and looping menu in the same video file, and set the loop point where the intro becomes the menu.

Then my only questions are how do I have the buttons visible only during the looped portion, and how do I provoke the outro to seamlessly play before my feature when selecting a button?

Thanks so much for any help.

Best,

-Stephanie

EDIT: I have found you can link your buttons to transition with a video file. This isn't exactly seamless, but it works.

I am still trying to figure out how to make the button icons appear later in the menu, without separating the intro from the menu completely. Any suggestions are much appreciated.

EDIT 2: By selecting Default Button: None you can effectively erase the button from the intro animation. I would like, however, for the button to appear at a certain point, but this does not seem possible. I guess the user will have to select a button manually.

Why is my audio on my DVD extremely low compared to the how it sounds in preview and in original .mov? HELP

forums_noreply@adobe.com — Thu, 30 Oct 2014 19:09:30 GMT

Someone help me before I go crazy. I have spent two full work days making and throwing away so many DVD's trying to fix this problem

What I am trying to do (nothing crazy!):

Make a DVD with a TV program that is 1:23:40.

I made a basic blank menu with a text button linked to the program timeline.

I preview everything, and it all looks and sounds great. **

My problem:

Once I burn my DVD I put it in the DVD Player and my audio is EXTREMELY low.

What I have Tried:

It took me a couple of times to get everything sounding great in the preview portion in Encore. At first I would export my project in premiere to encoder and encoded it using the DVD settings for NTSC, then I tried to do it with my original ProRes settings, but with those the audio was super low in the preview too.

So today I just simply exported my project from premiere straight to my desktop as .mov and Imported that into encore as a timeline. That is when the preview sounded perfect audio wise. However, once I burned the DVD I still ran into the same exact problem of SUPER LOW audio.

I tried the support by adobe but apparently they no longer offer that for Encore. These forums are my only option the guy said. Shame on Adobe for discontinuing their support for Encore

If anyone has had this issue and can help me I would GREATLY appreciate it.

Please email me directly at Staceyk.howell@yahoo.com with ADOBE AUDIO as the subject.

The email associated with this account is from our corporate office (which we don't have the log in for...) so I won't get notifications to responses back.

Thank you all and I hope I made sense!

-SKH

CS6 on Windows 7 - when I try and send my project to Adobe Link, then to Encore I repeatedly get the error message "Encore has stopped working, windows will close the program". I get the same error message when I try and open Encore on its own. Help wou

forums_noreply@adobe.com — Thu, 30 Oct 2014 17:32:50 GMT

Both when I open Encore as a standalone program, and when I try and export my work via Adobe Link to Send to Encore, I get the same error message - "Adobe Encore has stopped working. Windows will close the program. Help would really be appreciated. Thanks.

internal software error: .\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217

forums_noreply@adobe.com — Thu, 30 Oct 2014 16:23:24 GMT

What is this about?

how to install Encore Premiere Pro CSS

forums_noreply@adobe.com — Thu, 30 Oct 2014 16:08:16 GMT

how to install Encore Premiere Pro CSS

Encore CS5.1, Issue burning onto 8.5GB DL DVD using WIndows 7, 64bit

forums_noreply@adobe.com — Thu, 30 Oct 2014 00:21:46 GMT

Is anyone familiar with the inability of Encore CS5.1 to burn 8.5GB dual layer disc using Windows 7, 64bit. After many failed attempts, it turns out that you need to set Encore as Windows XP compatability in order to get the disc to burn. Is this just a glitch with Windows 7 + Adobe Encore CS5.1?

The problem with changes the compatability on Encore is that you lose the dynamic link with Premiere Pro CS5.5.

Any other suggestions on being able to burn without changing the compatability of Encore?

btw, 4.7GB DVDs work fine.

Thanks,

Gianni (JohnQ)

Just another user that wants Encore on CC

forums_noreply@adobe.com — Wed, 29 Oct 2014 19:33:04 GMT

It's frustrating to be a subscriber to CC when largely what I want to use it for presently is DVD authoring and video editing. Yes I'll use the work around but can't Adobe find the time to support this tool?